Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ardrox 9D1B, Aerosol (12 x 1)
- Product Form
- Aerosol
- Product Code
- 200509927
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Nondestructive Testing
Manufacturers & Suppliers
Chemetall Canada Limited.
manufacturer
1 Kenview Blvd, Unit 110, Brampton, ON L6T 5E6, CANADA
+1 905 791-1628
Emergency Contacts
Emergency Contact
800-424-9300
Emergency Contact
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propanone | 67-64-1 | 30 - 50% | Yes |
| Propane | 74-98-6 | 10 - 20% | Yes |
| 2-Propanol | 67-63-0 | 10 - 20% | Yes |
| Butane | 106-97-8 | 5 - 10% | Yes |
| Talc (Mg3H2(SiO3)4) | 14807-96-6 | 5 - 10% | Yes |
| Propane, 2-methyl- | 75-28-5 | 5 - 10% | Yes |
Unidentified ingredients are considered not hazardous, or not required to be listed under Workplace Hazardous Material Information System (WHMIS).
Notes
Unidentified ingredients are considered not hazardous, or not required to be listed under Workplace Hazardous Material Information System (WHMIS).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If symptoms persist, call a physician. If breathing is irregular or stopped, administer artificial respiration.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists
Rinse immediately with plenty of water for at least 15 minutes. Keep eye wide open while rinsing. Seek medical advice.
Rinse mouth. Drink plenty of water. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Remove all sources of ignition. Ventilate area. Remove all heat and ignition sources. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Keep in suitable, closed containers for disposal. Flush with plenty of water.
collect with non-combustible absorbent material, flush with plenty of water
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Take precautionary measures against static discharges. Unscrew closure slowly. Allow all pressure to escape through threads before removing closure
Keep containers dry and tightly closed to avoid moisture absorption and contamination. Store indoors in a cool, well-ventilated place. Keep container out of sun and away from heat.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Neoprene gloves
Chemical resistant goggles must be worn.
If occupational exposure limits are exceeded, proper control and protection measures should be implemented.
Rubber or plastic apron
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Heat, flames and sparks. Exposure to sunlight.
Strong oxidizing agents
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Refer to all federal, provincial, state and local regulation prior to disposition of container and unused contents by reuse, recycle or disposal.
Refer to all federal, provincial, state and local regulation prior to disposition of container and unused contents by reuse, recycle or disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ardrox 9D1B, Aerosol (12 x 1)?
The signal word is danger.
What is the physical form of Ardrox 9D1B, Aerosol (12 x 1)?
Ardrox 9D1B, Aerosol (12 x 1) is a aerosol containing a compressed gas appearing as aerosol containing a compressed gas with white color. It has sweet odor.
What is Ardrox 9D1B, Aerosol (12 x 1) used for?
Nondestructive Testing
What are the hazard statements for Ardrox 9D1B, Aerosol (12 x 1)?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H280: Contains gas under pressure; may explode if heated.
- H319: Causes serious eye irritation.
- H331: Toxic if inhaled.
- H336: May cause drowsiness or dizziness.
- H350: May cause cancer.
What is the melting point of Ardrox 9D1B, Aerosol (12 x 1)?
The melting point is No data available and the boiling point is No data available.