Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ardrox 9PR5, Aerosol
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergents
Uses advised against
None known
Manufacturers & Suppliers
Chemetall Ltd.
manufacturer
Denbigh Road 65, Bletchley Milton Keynes MK1 1PB, Great Britain
+44 1908 649333
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Blend based on: organic solvent
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| cyclohexane EC: 203-806-2 | 110-82-7 | 1 - 2% | Yes |
| Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics EC: 927-510-4 | --- | 50 - 75% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the affected individual into fresh air and keep the person calm. If symptoms persist, seek medical advice.
Wash affected areas thoroughly with soap and water. If symptoms persist, seek medical advice.
Rinse immediately with plenty of water, also under the eyelids, for at least 30 minutes. Seek medical attention.
Rinse mouth immediately with water. Do not induce vomiting. Seek medical attention.
Immediate Medical Attention
Seek medical advice or medical attention if symptoms persist.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, dry powder, alcohol-resistant foam, water spray
water jet
carbon oxides
Cool endangered containers with water-spray.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective clothing.
Do not discharge into drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Clean preferably with a detergent; avoid the use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation of working area (local exhaust ventilation if necessary). In closed rooms provide exhaust ventilation at floor level. The workplace should be equipped with an emergency shower and eye-rinsing facility. Warn users about safety measures and precautions to prevent accidents.
Keep container dry. Keep container tightly closed in a cool, well-ventilated place. The entrance to storage rooms is to be granted only to appropriately trained personnel. Keep away from heat. Avoid direct sunlight. Protect from frost.
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Further information on penetration time is available from the manufacturer of the glove. The protection glove should be tested for its specific suitability (e.g. mechanical strength, product compatibility, anti-static properties).
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Wear respiratory protection if ventilation is inadequate. (Gas filter EN 14387 AX)
Chemical resistant protective clothing according to DIN EN 13034 (Type 6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
Vapours may form explosive mixture with air. Risk of bursting.
Avoid all sources of ignition: heat, sparks, open flame. Avoid direct sunlight. Avoid prolonged exposure to extreme heat.
strong oxidizing agents
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Tunnel code: D
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ardrox 9PR5, Aerosol?
The signal word is danger.
What is the physical form of Ardrox 9PR5, Aerosol?
Ardrox 9PR5, Aerosol is a aerosol with colourless color. It has solvent-like odor.
What is Ardrox 9PR5, Aerosol used for?
Detergents
What are the hazard statements for Ardrox 9PR5, Aerosol?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.