Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KESTOPUR PL 240
- Product Code
- T1715
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable
Identified Uses
Industrial use ; Binding agents, Solvent-free two-part polyurethane adhesive (part 1)
Manufacturers & Suppliers
Temati BV
national supplier
P.O.Box 1005, 1940EA Beverwijk, The Netherlands
+31 (0)251 22 91 72
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product is not classified as a dangerous.
The product is not classified as a dangerous.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with warm water and soap.
Rinse immediately with plenty of water, also under the eyelids. If symptoms persist, call a physician.
Clean mouth with water and drink afterwards plenty of water. Consult a physician.
Immediate Medical Attention
None.
Medical Treatment
None.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not applicable
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See chapter 8
Do not allow material to contaminate ground water system. Prevent product from entering drains.
Pick up and transfer to properly labelled containers.
Materials: properly labelled containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stable under recommended storage conditions.
Keep in a dry place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Rubber or plastic gloves. Protective gloves complying with EN 374.
Safety glasses
During spraying respirator protection, type A2/P2, is to be used, also if the temperature rises over 40°C.
impervious clothing
The product is not classified hazardous to the environment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Reacts with isocyanates
None.
Protect from moisture.
None.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Liquid waste must be handled in accordance with the waste management plan given by the municipal waste management authority.
Hardened 2-component product can be taken to landfill with other municipal waste; resin and hardener residue must be mixed according to the instructions and let harden. Hardener is harmful and residue must be taken to a municipal hazardous waste collection point.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is not classified as a dangerous.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KESTOPUR PL 240?
The signal word is no signal word.
What is the physical form of KESTOPUR PL 240?
KESTOPUR PL 240 is a viscous blend appearing as viscous blend . It has odourless odor.
What is KESTOPUR PL 240 used for?
Industrial use ; Binding agents, Solvent-free two-part polyurethane adhesive (part 1)
What is the melting point of KESTOPUR PL 240?
The melting point is Not applicable and the boiling point is Not applicable.