NextSDS Logo
Safety Data Sheet EN

PRESLIA 46

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PRESLIA 46
Product Code
083287

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Turbine oil.

Manufacturers & Suppliers

T

TOTAL OIL MALAYSIA SDN BHD

2nd Level, Wisma Kemajuan, No. 2 Jalan 19/1B, 46300 Petaling Jaya, Selangor Darul Ehsan, Malaysia

+60 3 7711 2000

Emergency Contacts

Emergency Contact

+60 3 6207 4347

Emergency Contact

+65 3158 1074

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type uvcb

Mineral oil of petroleum origin.

Notes

Product containing mineral oil with less than 3% DMSO extract as measured by IP 346

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration.

Symptoms: Not classified based on available data. Inhalation of vapors in high concentration may cause irritation of respiratory system.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before reuse. High pressure jets may cause skin damage. Take victim immediately to hospital.

Symptoms: Not classified based on available data. High pressure injection of the products under the skin may have very serious consequences even though no symptom or injury may be apparent.

Eye contact

Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing.

Symptoms: Not classified based on available data.

Ingestion

Clean mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or Poison Control Center immediately.

Symptoms: Not classified based on available data. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Immediate Medical Attention

Take victim immediately to hospital.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO₂). ABC powder. Foam. Water spray or fog.

Unsuitable media

Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery. Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.

Large spill

Dike to collect large liquid spills.

Environmental

Do not allow material to contaminate ground water system. Prevent entry into waterways, sewers, basements or confined areas. Local authorities should be advised if significant spillages cannot be contained.

Cleanup methods

Dispose of contents/container in accordance with local regulation. In case of soil contamination, remove contaminated soil for remediation or disposal, in accordance with local regulations.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing.

Storage

Keep away from food, drink and animal feedingstuffs. Keep in a bunded area. Keep container tightly closed. Keep preferably in the original container. Otherwise reproduce all indication of the regulation label on the new container. Do not remove the hazard labels of the containers (even if they are empty). Design the installations in order to avoid accidental emissions of product (due to seal breakage, for example) onto hot casings or electrical contacts. Store at room temperature. Protect from moisture.

Hygiene

Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. When using, do not eat, drink or smoke. Wash hands before breaks and immediately after handling the product. Regular cleaning of equipment, work area and clothing is recommended. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Fire prevention

Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
limpid
Colour
colorless To yellow
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
No information available
Ph
Not applicable
Melting Point
Not applicable
Boiling Point
No information available
Flash Point
ASTM D92: 236 °C / 457 °F
Freezing Point
No information available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Vapor Pressure
No information available
Vapor Density
No information available
Relative Density
0.8638 @ 15 °C
Bulk Density
---
Density
863.8 kg/m³ @ 15 °C
Flammability
---
Upper Explosive Limit
No information available
Lower Explosive Limit
No information available
Explosive Limits
---
Auto Ignition Temperature
No information available
Decomposition Temperature
No information available
Solubility
---
Partition Coefficient
No information available
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
ASTM D445: 45.16 mm2/s @ 40 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

None under normal processing.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Keep away from heat and sparks.

Incompatible

Strong oxidizing agents.

Decomposition

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. Combustion products include sulphur oxides (SO2 and SO3) and Hydrogen sulphide H2S, Mercaptans, Nitrogen oxides (NOx), Phosphorous oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Ecotoxicity Not classified based on available data Acute aquatic toxicity - Product Information No information available. Acute aquatic toxicity - Component Information No information available Chronic aquatic toxicity - Product Information No information available. Chronic aquatic toxicity - Component Information No information available Effects on terrestrial organisms No information available.

12.2 Persistence and degradability

General Information No information available.

12.3 Bioaccumulative potential

Product Information No information available. logPow No information available Component Information No information available.

12.4 Mobility in soil

Soil Given its physical and chemical characteristics, the product generally shows low soil mobility Air Loss by evaporation is limited Water The product is insoluble and floats on water

12.5 Results of PBT and vPvB assessment

No information available.

12.6 Endocrine disrupting properties

No information available.

12.7 Other adverse effects

General Information No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Should not be released into the environment. Do not empty into drains. Dispose of in accordance with all applicable national environmental laws and regulations.

Disposal

Where possible recycling is preferred to disposal or incineration.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

All the substances contained in this product are listed or exempted from listing in the following inventories.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PRESLIA 46?

The signal word is no signal word.

What is the physical form of PRESLIA 46?

PRESLIA 46 is a liquid appearing as limpid with colorless to yellow color. It has characteristic odor.

What is PRESLIA 46 used for?

Turbine oil.

What is the melting point of PRESLIA 46?

The melting point is Not applicable and the boiling point is No information available.