Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYDROBAT 2000
- Product Code
- 02520003
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- W7MG-J0DC-G001-FF5F
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) Product category PC35 Washing and cleaning products (including solvent based products) Process category PROC7 Industrial spraying PROC10 Roller application or brushing PROC11 Non industrial spraying PROC9 Transfer of substance or mixture into small containers (dedicated filling line, including weighing) Environmental release category ERC8d Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor) Application of the substance / the mixture Construction chemicals Hydrophobing agent/ water repellent
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000 04011 Aprilia (LT) - Italy
+39.06.926691
www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30 4612 PN Bergen op Zoom The Netherlands
+ 31 164 250 100
ZEP UK Ltd
distributor
Tanhouse Lane Widnes Cheshire, WA8 0RD United Kingdom
+44 (0)151 422 1000
www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 918-481-9 | --- | 75 - 100% | Yes |
| tetraethyl silicate EC: 201-083-8 | 78-10-4 | 0.1 - 1% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. For the mixture of chemicals mentioned below the penetration time has to be at least 480 minutes (Permeation according to EN 16523-1:2015: Level 0.45mm). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR, PVA gloves. Not suitable are gloves made of the following materials: Strong material gloves
Tightly sealed goggles
Use suitable respiratory protective device only when aerosol or mist is formed. Filter AX
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Not applicable.
Not applicable.
Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYDROBAT 2000?
The signal word is danger.
What is HYDROBAT 2000 used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) Product category PC35 Washing and cleaning products (including solvent based products) Process category PROC7 Industrial spraying PROC10 Roller application or brushing PROC11 Non industrial spraying PROC9 Transfer of substance or mixture into small containers (dedicated filling line, including weighing) Environmental release category ERC8d Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor) Application of the substance / the mixture Construction chemicals Hydrophobing agent/ water repellent
What are the hazard statements for HYDROBAT 2000?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of HYDROBAT 2000?
The melting point is Undetermined. and the boiling point is 180 C.