Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Imperon Blue K-B
- Product Form
- Plastic drum with cover, 30l
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile dye
Manufacturers & Suppliers
DyStar Colours Distribution GmbH
distributor
Am Prime Park 10-12, D - 65479 Raunheim
+49 6142 4072 3172
Emergency Contacts
Emergency Contact
+49 2365 4984140
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
phthalocyanine copper complex pigment preparation, aqueous preparation
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-propylene glycol | 57-55-6 | 3 - 8% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon inhalation of aerosol/vapour/dust: Take the patient into the fresh air; if there is difficulty in breathing, medical advice is required.
Cleansing with plenty of water, soap or other non-irritating cleansing agents.
Contamination of the eyes must be treated by thorough irrigation with water, with the eyelids held open. Eventually a doctor (or eye specialist) should be consulted.
If the product is swallowed, the patient must at once drink water repeatedly, if possible with the addition of activated carbon. If the patient feels unwell, seek medical advice.
Immediate Medical Attention
If there is difficulty in breathing, medical advice is required. Eventually a doctor (or eye specialist) should be consulted. If the patient feels unwell, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible; Fire extinguishing method of surrounding areas must be discussed.
not determined
not determined
Firefighter Protection
Firemen have to wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use the necessary personal protection equipment during any work.
Do not empty into drains or waters.
Take up with absorbent material and fill into a closable container.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Close container immediately after use, avoid excessive heat. Do not allow to dry out.
Store sealed in original container in a cool place.
No special measures against fire or explosion required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves e.g. of PVC or nitrile rubber. In the event of contamination, change protective gloves immediately. Avoid skin contact with the wetted surfaces of the protective gloves.
safety glasses with side protection shield
combination filter, e.g. DIN 3181 ABEK, if product forms vapours.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Thermal decomposition : No thermal decomposition when stored and handled correctly.
No hazardous reactions when stored and handled according to prescribed instructions.
No hazardous reaction when used as directed.
not necessary
not necessary
Not applicable
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
If utilisation or recycling of the product is not possible, it should be disposed of according to the local regulations and laws, e. g. by incineration in a suitable plant.
If utilisation or recycling of the product is not possible, it should be disposed of according to the local regulations and laws, e. g. by incineration in a suitable plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No labelling is required in accordance with the EEC directives.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Imperon Blue K-B?
The signal word is no signal word.
What is the physical form of Imperon Blue K-B?
Imperon Blue K-B is a liquid with blue color. It has product specific odor.
What is Imperon Blue K-B used for?
Textile dye