InActiv Blue

Allow affected person to breathe fresh air. Allow the victim to rest. Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.

Take off immediately all contaminated clothing. Rinse skin with water/shower. Call poison center/doctor if skin feels uncomfortable.

Symptoms: Causes severe skin burns.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.

Symptoms: Causes severe eye damage.

Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor.

Symptoms: Swallowing a small quantity of this material will result in serious health hazard.

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Do not use a heavy water stream.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Evacuate unnecessary personnel. Ventilate area.

Prevent entry to sewers and public waters. Avoid release to the environment.

Soak up spills as soon as possible. Collect spillage. Store away from other materials.

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Do not breathe dust/fume/gas/mist/vapours/spray.

Keep only in the original container in a cool, well ventilated place away from : (sun) light. Keep container closed when not in use.

Do not eat, drink or smoke when using this product. Wash hands, forearms and face thoroughly after handling. Wash contaminated clothing before reuse.

Handle in accordance with good industrial hygiene and safety. Avoid all unnecessary exposure.

Wear protective gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to meet specifications of regulation EU 2016/425 and the standard EN374.

Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).

Wear appropriate mask. Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

The type of protection must be selected according to the concentration and volume of the dangerous substance at the specific workplace.

Not established.

Thermal decomposition generates : Corrosive vapours.

Not established.

Direct sunlight. Extremely high or low temperatures.

Strong acids. Strong bases. Oxidising materials. NEVER USE IN COMBINATION WITH JAVEL / BLEACH!

Fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapours.