Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Impermax® SP 50
- Product Form
- Mixture
- Product Code
- 908177
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Particle board industry, MDF & OSB. Water repellent agent for wood.
Uses advised against
No additional information available
Manufacturers & Suppliers
s.a. GOVI n.v.
manufacturer
Landegemstraat 8, B-9031 Drongen - België-Belgique-Belgium
http://www.govi.com
Emergency Contacts
Emergency Contact
+32 (0)9 282 94 95
8h30 - 17h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II
First Aid Measures
Emergency procedures for chemical exposure incidents
Assure fresh air breathing. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Seek medical attention if ill effect or irritation develops.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if pain, blinking or redness persists.
Rinse mouth. Do NOT induce vomiting. Seek medical attention if ill effect develops.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
None to our knowledge.
No additional information available
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Use appropriate container to avoid environmental contamination. Clean up any spills as soon as possible, using an absorbent material to collect it. Use suitable disposal containers.
Materials: absorbent material, suitable disposal containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety procedures. Wear appropriate personal protective equipment. (See section 8). Mix well before use. Avoid excessive shear through intensive / prolonged mixing, pumping with no suitable pumps which produce high shear (eg centrifugal, gear pumps etc. ...).
Keep container closed when not in use. Store in dry, well-ventilated area. This material is an emulsion which may stratify upon prolonged storage or by evaporation. Protect from freezing.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves made of rubber.
Chemical goggles or safety glasses.
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
The product is stable at normal handling and storage conditions.
Not established.
Freezing. Extremely high or low temperatures.
Cationic products. Strong oxidizers. Acids.
Thermal decomposition generates ; Carbon monoxide. Carbon dioxide. Nitrogen oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Impermax® SP 50?
The signal word is no signal word.
What is the physical form of Impermax® SP 50?
Impermax® SP 50 is a liquid with white. color. It has negligible. odor.
What is the solubility of Impermax® SP 50?
Miscible.
What is Impermax® SP 50 used for?
Particle board industry, MDF & OSB. Water repellent agent for wood.
What is the melting point of Impermax® SP 50?
The melting point is No data available and the boiling point is ≈ 100 °C.