Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 884 herkula ultraprint special
- Product Code
- 884
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
colour / ink
Uses advised against
not applicable
Manufacturers & Suppliers
FARBWERKE HERKULA SA-AG
manufacturer
Industriezone I, Friedensstrasse 21, 4780 St.Vith, BELGIUM
+32 (0) 80 22 87 63
http://www.herkula.com
Emergency Contacts
GBK Dangerous Goods Consulting LTD
+49 (0) 61 32 84 463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Radiation-hardening preparations
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 | 42978-66-5 | 10 - 25% | Yes |
| Isobornylacrylate EC: 227-561-6 | 5888-33-5 | 10 - 25% | Yes |
| Dipentaerythritol Pentaacrylate | --- | 10 - 25% | Yes |
| Bisphenol A Diglycidyl Diacrylate EC: 500-130-2 | 55818-57-0 | 1 - 10% | Yes |
| 2-Hydroxy-2-methylpropiophenone | --- | 1 - 10% | Yes |
| 2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one EC: 400-600-6 | 71868-10-5 | 1 - 10% | Yes |
| Tripropylenglycol, Esters with acrylic acid, reaction products with diethylamine | --- | 1 - 10% | Yes |
| benzophenone EC: 204-337-6 | 119-61-9 | 1 - 10% | Yes |
| Dipropyleneglycol Diacrylate EC: 260-754-3 | 54742-68-1 | 0.1 - 1% | Yes |
Full text of classification: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight
Symptoms: Causes mild skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
Seek medical advice immediately.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, carbon dioxide, Powder, spray mist, (water)
strong water jet
Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.
Cool closed containers that are near the source of the fire.
Firefighter Protection
Provide a conveniently located respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from sources of ignition. Ventilate affected area. Do not breathe vapours.
Do not allow to enter into surface water or drains.
Clean using cleansing agents. Do not use solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Persons with a history of skin sensitisation problems should not be employed in any process in which this product is used. Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation. Avoid respiration of swarf. Personal protection equipment: refer to
When using do not eat, drink or smoke.
Keep away from heat sources, sparks and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction.
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber). Thickness of the glove material > 0,4 mm; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374
Wear closely fitting protective glasses in case of splashes.
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.
No information available.
Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.
Heat, strong ultraviolet radiation. An exotherm polymerization of the product may thereby be caused. Avoid unintended contact with it. Hazardous decomposition byproducts may form with exposure to high temperatures.
not applicable
Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, nitrogen oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way. Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.
Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Tripropylen Glycol Diacrylate)
- Transport Class
- 9
- Packing Group
- III
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 884 herkula ultraprint special?
The signal word is danger.
What is the physical form of 884 herkula ultraprint special?
884 herkula ultraprint special is a liquid with refer to label color. It has characteristic odor.
What is 884 herkula ultraprint special used for?
colour / ink
What are the hazard statements for 884 herkula ultraprint special?
This substance has 6 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H360: May damage fertility. May damage the unborn child.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of 884 herkula ultraprint special?
The melting point is not applicable and the boiling point is not applicable.