NextSDS Logo
Safety Data Sheet EN

880/L 24541 herkula ultracoat spezial farblos matt

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
880/L 24541 herkula ultracoat spezial farblos matt
Product Code
880/L 24541

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

FARBWERKE HERKULA SA-AG logo

FARBWERKE HERKULA SA-AG

manufacturer

Industriezone I, Friedensstrasse 21, 4780 St.Vith, BELGIUM

+32 (0) 80 22 87 63

http://www.herkula.com

Emergency Contacts

GBK Dangerous Goods Consulting LTD

+49 (0) 61 32 84 463

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P280 Wear protective gloves and eye/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Radiation-hardening preparations

Chemical Name CAS Number Concentration Hazardous
hexamethylene diacrylate EC: 235-921-9 13048-33-4 10 - 30% Yes
Polyester Acrylate Oligomer --- 10 - 30% Yes
Ethoxylated Trimethylopropane Triacrylate EC: 500-066-5 28961-43-5 10 - 30% Yes
Dipentaerythritol Pentaacrylate EC: 800-838-4 1384855-91-7 1 - 10% Yes
2-Hydroxy-2-methylpropiophenone EC: 231-272-0 7473-98-5 1 - 10% Yes
2-Propenoic Acid and reaction with Pentaerythritol EC: 629-850-6 1245638-61-2 1 - 10% Yes
2,2'-(ethylenedioxy)diethyl diacrylate EC: 216-853-9 1680-21-3 0.1 - 1% Yes
Glycerol, propoxylated, esters with acrylic acid EC: 500-114-5 52408-84-1 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.

Skin contact

Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight

Symptoms: Causes mild skin irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.

Ingestion

If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.

Immediate Medical Attention

Seek medical advice immediately.

Medical Treatment

First Aid, decontamination, treatment of symptoms.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol resistant foam, carbon dioxide, Powder, spray mist, (water)

Unsuitable media

strong water jet

Specific hazards

Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.

Instructions

Cool closed containers that are near the source of the fire.

Firefighter Protection

Provide a conveniently located respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean using cleansing agents. Do not use solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Persons with a history of skin sensitisation problems should not be employed in any process in which this product is used. Avoid contact with skin, eyes and clothes. Avoid respiration of swarf. Personal protection equipment: refer to

Hygiene

When using do not eat, drink or smoke.

Fire prevention

Keep away from heat sources, sparks and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation. This can be achieved with local or room suction.

Hands

For prolonged or repeated handling the following glove material must be used: Tested protective gloves must be worn. Thickness of the glove material > 0,4 mm; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.

Eyes

Wear closely fitting protective glasses in case of splashes.

Respiratory

If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Use only respiratory protection equipment with CE-symbol including four digit test number.

Skin/Body

Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.

Environmental

Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Freezing Point
not applicable
Cloud Point
---
Kinematic Viscosity
50 s 6 mm
Colour Intensity
---
Relative Evaporation Rate
---
Odor Threshold
not applicable
Partition Coefficient
see section 12
Properties Status
---
Metal Corrosion
---
Bulk Density
---
Explosive Limits
---
Crystallisation Point
---
Density
1,11 g/cm³
Physical State
Liquid
Solubility In Fat
---
Upper Explosive Limit
not applicable
Flash Point
> 100 °C
Solubility In Water
---
Physical State Data
liquid
Decomposition Temperature
not applicable
Dynamic Viscosity
---
Voc Content
---
Solubility
---
Vapor Density
not applicable
Lower Explosive Limit
not applicable
Vapor Pressure
not applicable
Odor
characteristic
Solidification Point
---
Molecular Weight
---
Melting Point
not applicable
Evaporation Rate
not applicable
Softening Point
---
Form
---
Auto Ignition Temperature
not applicable
Appearance
---
Colour
refer to label
Ph
not applicable
Flammability
Burning time: not applicable
Boiling Point
not applicable
Relative Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.

Reactivity

No information available.

Hazardous reactions

Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.

Avoid

Heat, strong ultraviolet radiation. An exotherm polymerization of the product may thereby be caused. Avoid unintended contact with it. Hazardous decomposition byproducts may form with exposure to high temperatures.

Incompatible

not applicable

Decomposition

Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, nitrogen oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.

Disposal

This material and its container must be disposed of in a safe way.

Waste Codes

080312* waste ink containing hazardous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
not applicable
Shipping Name
not applicable
Transport Class
not applicable
Packing Group
not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 880/L 24541 herkula ultracoat spezial farblos matt?

The signal word is danger.

What is the physical form of 880/L 24541 herkula ultracoat spezial farblos matt?

880/L 24541 herkula ultracoat spezial farblos matt is a liquid with refer to label color. It has characteristic odor.

What are the hazard statements for 880/L 24541 herkula ultracoat spezial farblos matt?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H318: Causes serious eye damage.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of 880/L 24541 herkula ultracoat spezial farblos matt?

The melting point is not applicable and the boiling point is not applicable.