NextSDS Logo
ST

STABILOX B-AV/2055

DANGER Solid SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
STABILOX B-AV/2055
Product Code
131533

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

UFI Code
NUCY-8070-P00D-620E

Unique Formula Identifier - for poison centres and emergency response

Uses Information

Identified Uses
PVC stabilizer

Overview

STABILOX B-AV/2055 commonly used pvc stabilizer.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Eye Dam. Category 1 H318
Skin Sens. Category 1 H317
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H317: May cause an allergic skin reaction.
  • H318: Causes serious eye damage.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

  • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310: Immediately call a POISON CENTER/doctor.
  • P321: Specific treatment (see on this label).
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
  • P501: Dispose of contents/container in accordance with local/regional/national/ international regulations.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

REAGENS Deutschland GmbH

manufacturer

Gewerbering 25, DE-49393 Lohne

DE

+49-4442 943 0

+49-4442 943 200

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Regional Medicines and Poisons Information Centre NI

844 892 0111

GB

24 h

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mixture of substances listed below with nonhazardous additions.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
bis(pentane-2,4-dionato)calcium
EC: 243-001-3
19372-44-2 5-10% Hazardous
zinc dibenzoate
EC: 209-047-3
553-72-0 1-3% Hazardous
bis(pentane-2,4-dionato-O,O')zinc
EC: 237-860-3
14024-63-6 1-3% Hazardous

Additional Information

For the wording of the listed hazard phrases refer to section 16.

First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion/Swallowing

Call a doctor immediately.

Immediate Medical Attention Required

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not available
Boiling Point
Undetermined.
Critical Property
Solubility In Water
Insoluble.
Flammability
Not determined.
Melting Point
Undetermined.
Critical Property
Flash Point
Not applicable.
Critical Property
Freezing Point
Undetermined.
Crystallisation Point
Not available
Solidification Point
Not available
Vapor Pressure
Not applicable.
Evaporation Rate
Not applicable.
Relative Density
Not determined.
Voc Content
Not available
Auto Ignition Temperature
Not available
Odor Threshold
Not determined.
Odor
Characteristic
Decomposition Temperature
Not determined.
Vapor Density
Not applicable.
Ph
Mixture is non-soluble (in water).
Density
Not determined.
Critical Property
Solubility In Fat
Not available
Properties Status
Not available
Physical State
Solid
Critical Property
Molecular Weight
Not available
Solubility
Not available
Physical State Data
solid
Relative Evaporation Rate
Not available
Kinematic Viscosity
Not applicable.
Colour
Whitish
Colour Intensity
Not available
Metal Corrosion
Void
Upper Explosive Limit
Not available
State Under Standard Conditions
Not available
Softening Point
Not available
Cloud Point
Not available
Explosive Limits
Not available
Dynamic Viscosity
Not applicable.
Form
Powder
Partition Coefficient
Not determined.
Bulk Density
0.5 g/cc
Appearance
Not available
Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

Ensure good ventilation/exhaustion at the workplace.

Hand Protection

Protective gloves against chemical risks according to EN 374 when handling. The glove should be chosen based on the specific conditions of use; the material, the thickness and the passage time must be selected along with the supplier. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.

Eye Protection

Tightly sealed goggles

Respiratory Protection

dust filter

Environmental Exposure Controls

Do not allow product to reach sewage system or any water course. Do not allow to penetrate the ground/soil.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

Void

Proper Shipping Name

Void

Transport Hazard Class

Void

Packing Group

Void

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for STABILOX B-AV/2055?

The signal word for this substance is "danger".

What is the physical form of STABILOX B-AV/2055?

STABILOX B-AV/2055 is a solid with whitish color. It has characteristic odor.

What is STABILOX B-AV/2055 used for?

PVC stabilizer

What are the hazard statements for STABILOX B-AV/2055?

This substance has 3 hazard statements: H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H412: Harmful to aquatic life with long lasting effects.

What is the melting point of STABILOX B-AV/2055?

The melting point is Undetermined. and the boiling point is Undetermined..