Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARC BX5(E) Part B
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- Q6N6-KKX7-CPEV-867X
Manufacturers & Suppliers
Chesterton International GmbH
manufacturer
Am Lenzenfleck 23, D-85737 Ismaning GERMANY
+49 89 99 65 46 - 0
http://www.chesterton.com
Emergency Contacts
GIZ-Nord
+49(0) 551 - 1 92 40
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Formaldehyde, oligomeric reaction products with phenol and m-phenylenebis(methylamine) EC: 500-137-0 | 57214-10-5 | 10 - 15% | Yes |
| m-phenylenebis(methylamine) EC: 216-032-5 | 1477-55-0 | 10 - 15% | Yes |
| Calcium nitrate EC: 233-332-1 | 10124-37-5 | 1 - 5% | Yes |
| ethanol, ethyl alcohol EC: 200-578-6 | 64-17-5 | 1 - 5% | Yes |
| N-(3-(trimethoxysilyl)propyl)ethylenediamine EC: 217-164-6 | 1760-24-3 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a doctor.
After contact with skin, wash immediately with plenty of water and soap. Seek medical advice immediately.
Symptoms: Causes severe skin burns. Skin sensitisation.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
Symptoms: Causes severe eye damage.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/physician.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry extinguishing powder, Carbon dioxide (CO2), alcohol resistant foam, Water spray jet.
Full water jet.
Co-ordinate fire-fighting measures to the fire surroundings.
Firefighter Protection
Protective clothing. In case of fire: Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Remove persons to safety.
Do not allow to enter into surface water or drains. Cover drains. Adverse environmental effects
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
ARC BX5 (MX5) (Part B)
---
ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)
---
ARC BX2 (Part A) (GY, RD), ARC BX5 (MX5) (Part A) (GY, RD)
---
ARC 855(E) Part B
---
ARC 855(E) B (Part A), ARC 855(E) G (Part A)
---
TEROSON EP 5010 TR Part B
---
BC-346-A
---
STABILOX B-AV/2055
UFI: NUCY-8070-P00D-620E
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protection equipment (refer to section 8). Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin, eyes and clothes. Take off contaminated clothing and wash it before reuse. Contaminated work clothing should not be allowed out of the workplace. When using do not eat, drink or smoke. Never use pressure to empty container. Keep/Store only in original container.
Keep container tightly closed in a cool, well-ventilated place. Keep/Store only in original container. Keep away from: Frost, Heat, Humidity.
Only wear fitting, comfortable and clean protective clothing. Avoid contact with skin, eyes and clothes. Wash hands and face before breaks and after work and take a shower if necessary.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Tested protective gloves must be worn: EN ISO 374 NBR (Nitrile rubber), Wearing time with permanent contact: Thickness of the glove material: >= 0,4 mm, Breakthrough time:: >480 min Wearing time with occasional contact (splashes):: Thickness of the glove material: >= 0,1 mm, Breakthrough time: > 30 min For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Breakthrough times and swelling properties of the material must be taken into consideration.
Eye glasses with side protection, goggles
Usually no personal respirative protection necessary. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Combination filtering device A-P3, Self-contained respirator (breathing apparatus)
Wear suitable protective clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
The product is stable under storage at normal ambient temperatures.
Exothermic reaction with: - Acid, - Oxidising agent
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.
Acid, Oxidising agent
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1 Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.5. Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6. Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties as no components meet the criteria.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2735
- Shipping Name
- AMINES, LIQUID, CORROSIVE, N.O.S. (m-phenylenebis(methylamine))
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARC BX5(E) Part B?
The signal word is danger.
What is the physical form of ARC BX5(E) Part B?
ARC BX5(E) Part B is a paste with red brown color. It has characteristic odor.
What are the hazard statements for ARC BX5(E) Part B?
This substance has 3 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ARC BX5(E) Part B?
The melting point is No data available and the boiling point is No data available.