Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hydrochloric acid 1 mol/L EMPROVE® EXPERT
- Product Code
- 1.10165
- Chemical Name
- Hydrochloric acid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic reagent, Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
Frankfurter Str. 250, D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric Acid EC: 231-595-7 | 7647-01-0 | 3 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Immediate Medical Attention
Call in ophthalmologist (for eye contact), Consult doctor if feeling unwell (for ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Hydrogen chloride gas. Not combustible.
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Collect, bind, and pump off spills. Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595).
Related Products
Similar products with comparable safety profiles
Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio
---
Phosphoric acid 75% EMPROVE® EXPERT
---
Hydrochloric acid 1M
UFI: EQCA-53ER-9X05-HFT1
Hydrochloric acid 0.1 mol/l
CAS: 7647-01-0
Hydrochloric acid 0.5 mol/l
CAS: 7647-01-0
Hydrochloric acid 0.01 mol/l
CAS: 7647-01-0
Sodium hydroxide solution 32% EMPROVE® EXPERT
---
Hydrochloric acid, 1.0N Standardized Solution
UFI: 6ACQ-4W9Y-GU10-65DG
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
No metal containers. Tightly closed. Recommended storage temperature see product label.
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
Recommended Filter type: filter E-(P2). The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
See section 10.3
Generates dangerous gases or fumes in contact with: Metals Violent reactions possible with: The generally known reaction partners of water.
no information available
Metals, metal alloys
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1789
- Shipping Name
- HYDROCHLORIC ACID
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hydrochloric acid 1 mol/L EMPROVE® EXPERT?
The signal word is warning.
What is the physical form of Hydrochloric acid 1 mol/L EMPROVE® EXPERT?
Hydrochloric acid 1 mol/L EMPROVE® EXPERT is a liquid with colorless color. It has odorless odor.
What is Hydrochloric acid 1 mol/L EMPROVE® EXPERT used for?
In vitro diagnostic reagent, Reagent for analysis
What are the hazard statements for Hydrochloric acid 1 mol/L EMPROVE® EXPERT?
This substance has 1 hazard statement:
- H290: May be corrosive to metals.
What is the melting point of Hydrochloric acid 1 mol/L EMPROVE® EXPERT?
The melting point is No data available and the boiling point is No data available.