Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio
- Product Code
- 110165
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. REACH Registration Number see section 3.
Identified Uses
Pharmaceutical production, Reagent for analysis, In vitro diagnostic reagent
Manufacturers & Suppliers
Merck Chemicals Ltd
distributor
Boulevard Industrial Park * Padge Road * Beeston * Nottingham * NG9 2JR
01159 430840
Emergency Contacts
Emergency Contact
+49 (0) 6151 722440
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrochloric acid | 7647-01-0 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.
make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Immediate Medical Attention
No information available.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Hydrochloric acid 1 mol/L EMPROVE® EXPERT
---
Hydrochloric acid 1M
UFI: EQCA-53ER-9X05-HFT1
Hydrochloric acid 0.1 mol/l
CAS: 7647-01-0
Hydrochloric acid ≥ 25%
CAS: not relevant (mixture)
Hydrochloric acid, 1.0N Standardized Solution
UFI: 6ACQ-4W9Y-GU10-65DG
Hydrochloric acid 0.5 mol/l
CAS: 7647-01-0
Hydrochloric acid 0.01 mol/l
CAS: 7647-01-0
Hydrochloric acid 37%
UFI: D2U1-VRMD-5JR6-C6XR
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: - 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0.11 mm, Break through time: - 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when vapours/aerosols are generated. Recommended Filter type: filter E-(P2). The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1789
- Shipping Name
- HYDROCHLORIC ACID
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio?
The signal word is warning.
What is the physical form of Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio?
Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio is a liquid with colourless color. It has odourless odor.
What is Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio used for?
Pharmaceutical production, Reagent for analysis, In vitro diagnostic reagent
What are the hazard statements for Hydrochloric acid 1 mol/L suitable for biopharmaceutical production EMPROVE® bio?
This substance has 1 hazard statement:
- H290: May be corrosive to metals.