Ultra Glaco

remove the victim to fresh air. Keep warm and calm. Consult a doctor, if disturbing symptoms occur.

Symptoms: high concentration of vapours and mists may lead to irritation of mucous membranes of eyes and respiratory tract, tearing, redness of conjunctiva, cough, burning sensation in throat and nose. May cause drowsiness or dizziness.

take off contaminated clothes. Immediately wash contaminated skin thoroughly with water. If there is no sign of irritation it is recommended to use soap. Consult a doctor if disturbing symptoms occur.

Symptoms: possible redness, dryness, defatting, cracking, irritation.

contact an ophthalmologist if disturbing symptoms occur. Protect non-irritated eye, remove contact lenses. Rinse contaminated eyes with water for at least 10-15 minutes. Avoid strong stream of water – risk of damage of the cornea.

Symptoms: possible tearing, redness, irritation.

do not induce vomiting. Call doctor immediately, show container or label. In case of spontaneous vomiting do not allow vomit to enter airways. Never give anything by mouth to an unconscious person.

Symptoms: abdominal pains, nausea, vomiting.

extinguishing powder, alcohol resistant extinguishing foam, carbon dioxide, water fog. Adjust extinguishing media to the materials stored in the product vicinity.

water jet – risk of propagation of flame.

During combustion harmful gases consisting of carbon oxides, nitrous oxides, organic vapours etc. may be produced. Pressure inside the container increases when heated or exposed to fire, what may lead to an explosion. Product vapours may create explosive/dangerous mixtures with air.

Isolate the exposed area, do not take any actions which may cause risk for life and health. Cool endangered containers with water fog from a safe distance.

Limit the access for the outsiders into the breakdown area, until the suitable cleaning operations are completed. Ensure that removing the problem and its results is conducted by a trained personnel only. In case of large spills, isolate the exposed area.

In case of large spills, isolate the exposed area.

Secure sewers, water installations and entrances to basements and other closed areas.

Collect leakage using non-flammable liquid binding materials and place it in correctly labelled containers.

Materials: sand, earth, universal binding substances, silica, vermiculite

Take special care when handling the product. Do not eat, drink or smoke when using the product. Avoid eyes and skin contamination. Wear adequate protective clothing. Do not inhale vapours. Wash hands before breaks and after work. Protect product from moisture and high temperature. Work away from sources of fire. Do not smoke.

Store only in original, tight containers in a dry, cool and well ventilated place. Keep away from food, foodstuffs, animal feed and drinking water. Opened container should be resealed and stored upright to prevent leaking. Store away from sources of heat and ignition. and direct sunlight.

Do not eat, drink or smoke when using the product. Wash hands before breaks and after work.

Work away from sources of fire. Do not smoke.

Ensure adequate ventilation.

Use adequate protective gloves. According to the demand wear gloves resistant to solvents or vinyl gloves. In case of short term contact use protective gloves with effectiveness level 2 or higher (permeation time > 30 minutes). In case of long term contact use protective gloves with effectiveness level 6 (permeation time > 480 minutes). The material that the gloves are made of must be impenetrable and resistant to the product's effects. The selection of material must be performed with consideration of breakthrough time, penetration speed and degradation. Moreover, the selection of proper gloves depends not only on the material, but also on other quality features and changes depending on the manufacturer. The producer should provide detailed information regarding the exact breakthrough time. This information should be followed

Use tightly fitting protective glasses if there is a risk of eye contamination.

Respiratory protection is not required when product is used as intended.

Wear protective clothing.

Avoid release to the environment, do not enter the sewage system. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

The product is stable under normal conditions of handling and storage.

Product is reactive. It does not undergo hazardous polymerization. See also subsections 10.3 and 10.5

Not known.

Avoid direct sunlight, sources of heat and fire.

Avoid contact with strong oxidizers.

There are no hazardous decomposition products when product is stored and used as recommended.

disposal in accordance with the local legislation. Store product residues in original containers. Do not let product to enter sewage system. Waste code should be assigned in place of formation.

disposal in accordance with the local legislation. Store product residues in original containers.

Use personal protective equipment in accordance with section 8 of SDS. Avoid sources of ignition and fire.

Use personal protective equipment in accordance with section 8 of SDS. Avoid sources of ignition and fire.

Use personal protective equipment in accordance with section 8 of SDS. Avoid sources of ignition and fire.