Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GENOMER* 5695
- Synonyms
- Modified acrylated polyetherpolyol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for radically curable inks, coatings, adhesives, fillers, etc.
Uses advised against
No information available
Manufacturers & Suppliers
RAHN AG
Dörflistrasse 120, 8050 Zürich, Switzerland
+41 44 315 42 00
Emergency Contacts
Tox Info Suisse
+41 44 251 51 51
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain candidate substances of very high concern at a concentration ≥0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Modified acrylated polyetherpolyol | --- | 90 - 95% | No |
| Acrylated polyetherpolyol | --- | 1 - 5% | Yes |
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)
Notes
Full text of H- and EUH-phrases: see section 16 Acute Toxicity Estimate See chapter 11.1
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Avoid contact with UV and sunlight.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a doctor.
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Small Fire: Dry chemical, CO2 or water spray. Large Fire: Alcohol resistant foam. Water spray.
Full water jet.
No information available.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation.
Do not flush into surface water or sanitary sewer system.
Take up mechanically, placing in appropriate containers for disposal.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up. Do not store at temperatures above 40 °C (104 °F). Keep away from heat. Protect from sunlight. Store in a well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves should be replaced regularly and if there is any sign of damage to the glove material. Wear suitable gloves. Nitrile rubber.
Wear safety glasses with side shields (or goggles).
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
No known hazardous reactions.
Keep away from sources of ignition - No smoking. Polymerization occurs when exposed to white light, ultraviolet light or heat. UV-radiation/sunlight.
Avoid contact with radical forming initiators, peroxides, strong alkalis or reactive metals to prevent exothermic polymerization.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be landfilled or incinerated, when in compliance with local regulations.
Can be landfilled or incinerated, when in compliance with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Chemical safety assessment: No information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is GENOMER* 5695 known by?
GENOMER* 5695 is also known as: Modified acrylated polyetherpolyol
What is the hazard signal word for GENOMER* 5695?
The signal word is no signal word.
What is the physical form of GENOMER* 5695?
GENOMER* 5695 is a liquid with light yellow color. It has ester-like odor.
What is the solubility of GENOMER* 5695?
No data available
What is GENOMER* 5695 used for?
Resin for radically curable inks, coatings, adhesives, fillers, etc.
What are the hazard statements for GENOMER* 5695?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of GENOMER* 5695?
The melting point is No data available and the boiling point is No data available.