Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GENOMER* 6043/M22
- Synonyms
- Saturated polyester resin in G*1122
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for radically curable inks, coatings, adhesives, fillers, etc.
Uses advised against
No information available
Manufacturers & Suppliers
RAHN AG
manufacturer
Dörflistrasse 120, 8050 Zürich, Switzerland
+41 44 315 42 00
Emergency Contacts
Tox Info Suisse
+41 44 251 51 51
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-[[(butylamino)carbonyl]oxy]ethyl acrylate (main constituent >84%) EC: 264-036-0 | 63225-53-6 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash with soap and water. Avoid contact with UV and sunlight.
Symptoms: May cause an allergic skin reaction.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Consult a doctor.
Medical Treatment
Note to doctors May cause sensitisation in susceptible persons. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Small Fire: Dry chemical, CO2 or water spray. Large Fire: Alcohol resistant foam. Water spray.
Full water jet.
Product is or contains a sensitiser. May cause sensitisation by skin contact.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Do not flush into surface water or sanitary sewer system. See Section 12 for additional Ecological Information.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash it before reuse.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up. Do not store at temperatures above 40 °C (104 °F). Keep away from heat. Protect from sunlight. Store in a well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash it before reuse.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves.
Wear safety glasses with side shields (or goggles).
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
No known hazardous reactions.
Keep away from sources of ignition - No smoking. UV-radiation/sunlight.
Avoid contact with radical forming initiators, peroxides, strong alkalis or reactive metals to prevent exothermic polymerization.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is GENOMER* 6043/M22 known by?
GENOMER* 6043/M22 is also known as: Saturated polyester resin in G*1122
What is the hazard signal word for GENOMER* 6043/M22?
The signal word is warning.
What is the physical form of GENOMER* 6043/M22?
GENOMER* 6043/M22 is a liquid appearing as according to product specification with according to product specification color. It has characteristic odor.
What is GENOMER* 6043/M22 used for?
Resin for radically curable inks, coatings, adhesives, fillers, etc.
What are the hazard statements for GENOMER* 6043/M22?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H332: Harmful if inhaled.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of GENOMER* 6043/M22?
The melting point is No data available and the boiling point is No data available.