Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GENOMER* 4230
- Synonyms
- Aliphatic urethane diacrylate
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for radically curable inks, coatings, adhesives, fillers, etc.
Manufacturers & Suppliers
RAHN USA Corp.
1005 North Commons Drive, Aurora, IL 60504
+1 630 851 4220
Emergency Contacts
Infotrak
+1 800 535 5053
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aliphatic urethane diacrylate | --- | 95% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists. Avoid contact with UV and sunlight.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Do not rub affected area.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician.
Immediate Medical Attention
Get medical attention immediately if symptoms occur (inhalation). Get medical attention if irritation develops and persists (eye/skin). Call a physician (ingestion).
Medical Treatment
Note to physicians: Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Small Fire: Dry chemical, CO2 or water spray. Large Fire: Alcohol resistant foam. Water spray.
Full water jet.
No information available.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal protective equipment as required.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before reuse.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up. Keep away from heat. Protect from sunlight.
Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product. Avoid contact with skin, eyes or clothing.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers Eyewash stations Ventilation systems.
Wear suitable gloves. Impervious gloves. Nitrile rubber. Gloves should be replaced regularly and if there is any sign of damage to the glove material.
If splashes are likely to occur, wear safety glasses with side-shields.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
No known hazardous reactions.
Keep away from sources of ignition - No smoking. UV-radiation/sunlight.
Strong acids. Strong bases. Strong oxidizing agents. Avoid contact with radical forming initiators, peroxides, strong alkalis or reactive metals to prevent exothermic polymerization.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
The substance is classified as harmful to aquatic life.
Persistence and degradability
No information available.
Bioaccumulation
There is no data for this product.
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be landfilled or incinerated, when in compliance with local regulations
Can be landfilled or incinerated, when in compliance with local regulations
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is GENOMER* 4230 known by?
GENOMER* 4230 is also known as: Aliphatic urethane diacrylate
What is the hazard signal word for GENOMER* 4230?
The signal word is warning.
What is the physical form of GENOMER* 4230?
GENOMER* 4230 is a liquid with no information available color. It has characteristic odor.
What is GENOMER* 4230 used for?
Resin for radically curable inks, coatings, adhesives, fillers, etc.
What are the hazard statements for GENOMER* 4230?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of GENOMER* 4230?
The melting point is No information available and the boiling point is No data available.