Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aerosol NC Decklack uni glanz, schwarz
- Product Form
- Aerosol
- Product Code
- REZ1064
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), painting
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Peter Kwasny GmbH
manufacturer
Heilbronner Str. 96, D-74831 Gundelsheim
0049-(0)6269-95-20
Emergency Contacts
Emergency Contact
+49 6269 95 20
National Poisons Information Service, Birmingham
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| butane (containing ≤ 0,1 % butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 5 - 10% | Yes |
| nitrocellulose with water(not less than 25% water, by mass) | 9004-70-0 | 5 - 10% | Yes |
| isobutane (containing ≤ 0,1 % butadiene (203-450-8)) EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5 - 5% | Yes |
| ethanol EC: 200-578-6 | 64-17-5 | 1 - 2.5% | Yes |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 1% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 1 - 2.5% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 1 - 2.5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 1% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1% | Yes |
| butyl glycollate EC: 230-991-7 | 7397-62-8 | 1% | Yes |
| Carbon black EC: 215-609-9 | 1333-86-4 | 1% | No |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Cool container whit water
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to section 13.
Related Products
Similar products with comparable safety profiles
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni mattiert, diff colors
---
Aerosol NC
---
880/L 24541 herkula ultracoat spezial farblos matt
---
UV-topcoat LM 5075 matt
---
UV-topcoat LM 4727 matt
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Gloves must be changed after every contamination. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: butyl rubber, 0,7mm
Safety glasses. Tightly sealed goggles.
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or breathing mask with outer air supply.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Protected from sources of heat.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aerosol NC Decklack uni glanz, schwarz?
The signal word is danger.
What is the physical form of Aerosol NC Decklack uni glanz, schwarz?
Aerosol NC Decklack uni glanz, schwarz is a aerosol with according to product specification color. It has characteristic odor.
What is Aerosol NC Decklack uni glanz, schwarz used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), painting
What are the hazard statements for Aerosol NC Decklack uni glanz, schwarz?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Aerosol NC Decklack uni glanz, schwarz?
The melting point is Undetermined. and the boiling point is -44 °C.