TRIAMEEN Y12

If breathed in, move person into fresh air. Consult a physician after significant exposure.

Take off contaminated clothing and shoes immediately. Rinse immediately with plenty of water. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

Symptoms: untreated wounds from corrosion of the skin heal slowly and with difficulty. Causes severe burns.

Rinse with plenty of water. Get medical attention immediately. Continue to rinse during transport. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Take victim immediately to hospital. Do not induce vomiting!

Symptoms: May cause chemical burns in mouth and throat. Toxic if swallowed.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Do not allow run-off from fire fighting to enter drains or water courses.

Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Use personal protective equipment. Wear respiratory protection. Ensure adequate ventilation. Evacuate personnel to safe areas. Only qualified personnel equipped with suitable protective equipment may intervene. Prevent unauthorised persons entering the zone.

Do not flush into surface water or sanitary sewer system. Discharge into the environment must be avoided.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

For personal protection see section 8. Avoid formation of aerosol. Do not breathe vapours or spray mist. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.

Prevent unauthorized access. Keep container tightly closed in a dry and well-ventilated place. Reacts with copper, aluminium, zinc and their alloys. No decomposition if stored and applied as directed.

Avoid contact with skin, eyes and clothing. When using do not eat or drink. When using do not smoke. Wash hands before breaks and immediately after handling the product.

Normal measures for preventive fire protection.

Effective exhaust ventilation system Ensure that eyewash stations and safety showers are close to the workstation location.

Nitrile rubber; butyl-rubber

Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.

In the case of vapour or aerosol formation use a respirator with an approved filter. Wear full face mask supplied with: Combination filter: ABEKP.

Protective suit

Stable under recommended storage conditions.

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

Extremes of temperature and direct sunlight.

None known.

No hazardous decomposition products are known.