Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARMEEN 2HT
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surfactant
Manufacturers & Suppliers
Nouryon Surface Chemistry LLC
manufacturer
131 S Dearborn St, Suite 1000, Chicago IL 60603-5566, US
+18009069977
Emergency Contacts
CANUTEC
+1 613-996-6666
CHEMTREC
+1 800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Di(hydrogenated tallow)amine | --- | 90 - 100% | Yes |
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain medical attention immediately.
Carefully remove paste or solidified product. Wash skin immediately with 0,5 % acetic acid in water, and then with soap and water. This may be prevented by early treatment with medium strength corticosteroids.
Symptoms: Skin irritation, if untreated, may be prolonged and serious (e.g., necrosis).
In case of contact with eyes, rinse immediately with 0.5% acetic acid in water for a few minutes, followed by rinsing with plenty of water for as long as possible. Eyelids should be held away from the eyeball to ensure thorough rinsing. Get medical attention immediately. Continue to rinse during transport of patient. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Obtain medical attention immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Treat as oil fire. Do not use a solid water stream as it may scatter and spread fire. Water spray may be ineffective unless used by experienced firefighters. Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Only qualified personnel equipped with suitable protective equipment may intervene. Prevent unauthorized persons entering the zone.
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Pick up and arrange disposal without creating dust.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of respirable particles. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place. Avoid elevated temperatures. Prevent unauthorized access.
Smoking, eating and drinking should be prohibited in the application area.
Provide appropriate exhaust ventilation at places where dust is formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide eyewash station and safety shower. Keep solutions of 0.5% acetic acid in water close at hand.
Glove material: Nitrile rubber; Glove material: butyl-rubber
Tightly fitting safety goggles
In the case of dust, vapor or aerosol formation use respirator with an approved filter. Wear full face mask supplied with: Combination filter: ABEKP.
Protective suit
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
None known.
Reacts with copper, aluminum, zinc and their alloys
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Alkylamine)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARMEEN 2HT?
The signal word is warning.
What is the physical form of ARMEEN 2HT?
ARMEEN 2HT is a solid appearing as white with white color. It has ammoniacal odor.
What is the solubility of ARMEEN 2HT?
insoluble
What is ARMEEN 2HT used for?
Surfactant
What are the hazard statements for ARMEEN 2HT?
This substance has 2 hazard statements:
- H373: May cause damage to organs (Liver) through prolonged or repeated exposure.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of ARMEEN 2HT?
The melting point is 60 - 64 °C and the boiling point is > 300 °C.