Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Maxipak N, Maxipak S & Maxipak W
- Product Code
- 10565
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
ELGA LabWater, VWS (UK) Ltd.
distributor
Lane End Industrial Park, High Wycombe Bucks. HP14 3BY, England
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Plastic bag containing ion exchange resins.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulphonated copolymer of styrene and divinylbenzene in the hydrogen form | 069011-20-7 | 20% | Yes |
| Triethylamine functionalised copolymer of styrene and divinylbenzene in the hydroxide form | 069011-18-3 | 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash off in flowing water or shower.
Symptoms: None.
Irrigate with flowing water for at least 15 minutes. Remove all particles. Consult medical staff.
Symptoms: Irritation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, CO2, Dry chemical.
Firefighter Protection
Wear self-contained breathing apparatus and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent contamination of surface and ground-water.
Contain and sweep up. Transfer to containers for recovery/disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protective gloves. Safety glasses and eyewash. May cause slippery surfaces.
Avoid freezing and dehydration. Allow room for expansion.
Static discharge may accumulate on dry beads.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Normal ventilation sufficient.
Protective gloves.
Use chemical goggles.
Protection not required.
Protective gloves.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Storing above 50°C may result in amine vapour.
Nitric Acid and strong oxidisers. Risk of explosion.
Monomers, Residual organics, Carbon Oxides, Amines, Nitrogen Oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Landfill/controlled incineration.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Neutral form not classified hazardous.
Label Name: Chemical name not required. Symbols: Xi Irritant. Risk Phrases: R36 Irritating to eyes. Safety Phrases: S26 In case of contact of chemical components with eyes, rinse immediately with plenty of water and seek medical advice; S39 Wear eye/face protection. Use of this material may be governed by the following regulations: No detail.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Maxipak N, Maxipak S & Maxipak W?
The signal word is no signal word.
What is the physical form of Maxipak N, Maxipak S & Maxipak W?
Maxipak N, Maxipak S & Maxipak W is a spherical beads appearing as spherical beads –white to dark amber. with white to dark amber color. It has slight amine. odor.
What are the hazard statements for Maxipak N, Maxipak S & Maxipak W?
This substance has 1 hazard statement:
- Irritating to eyes.