Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SPIT MULTI-MAX PLUS PART A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin.
Manufacturers & Suppliers
SPIT
manufacturer
150 avenue de Lyon 26500 BOURG-LES-VALENCE France
0 810 102 102
Emergency Contacts
Emergency Contact
112
24/24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| VINYL TOLUENE EC: 246-562-2 | 25013-15-4 | 10 - 20% | Yes |
| TITANIUM DIOXIDE EC: 236-675-5 | 13463-67-7 | 0.5 - 1% | Yes |
| 2,2'-[(4-METHYLPHENYL)IMINO] BISETHANOL EC: 221-359-1 | 3077-12-1 | 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash skin thoroughly with soap and water.
Symptoms: Irritating to skin.
Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes.
Symptoms: Irritating to eyes.
Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse mouth thoroughly with water.
Symptoms: May cause discomfort if swallowed.
Immediate Medical Attention
Get medical attention if any discomfort continues (ingestion). Get medical attention if irritation persists after washing (eye contact).
Medical Treatment
No specific recommendations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with foam, carbon dioxide or dry powder.
Not considered to be a significant hazard due to the small quantities used.
Avoid breathing fire gases or vapours.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
Collect and place in suitable waste disposal containers and seal securely.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Keep away from heat and flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe any occupational exposure limits for the product or ingredients.
It is recommended that chemical-resistant, impervious gloves are worn.
Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible.
No specific recommendations. Respiratory protection may be required if excessive airborne contamination occurs.
Wear appropriate clothing to prevent any possibility of skin contact.
Keep container tightly sealed when not in use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures.
The following materials may react with the product: Organic peroxides/hydroperoxides.
Does not decompose when used and stored as recommended.
Avoid excessive heat for prolonged periods of time.
Organic peroxides/hydroperoxides.
Oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SPIT MULTI-MAX PLUS PART A?
The signal word is warning.
What is the physical form of SPIT MULTI-MAX PLUS PART A?
SPIT MULTI-MAX PLUS PART A is a solid. appearing as solid. with beige. color. It has aromatic. odor.
What is SPIT MULTI-MAX PLUS PART A used for?
Resin.
What are the hazard statements for SPIT MULTI-MAX PLUS PART A?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of SPIT MULTI-MAX PLUS PART A?
The melting point is Not determined. and the boiling point is Not determined..