Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1-Pentanol
- Product Code
- 9077
- Chemical Name
- 1-Pentanol
Regulatory Identifiers
- CAS Number
- 71-41-0 Check regulations →
- EC Number
- 200-752-1 Check regulations →
Identified Uses
laboratory chemical
Manufacturers & Suppliers
Carl Roth GmbH + Co KG
Schoemperlenstr. 3-5 D-76185 Karlsruhe Germany
+49 (0) 721 - 56 06 0
www.carlroth.de
Emergency Contacts
Poison Centre Munich
+49/(0)89 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Amyl alcohol EC: 200-752-1 | 71-41-0 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, administer artificial respiration. Medical treatment necessary.
Rinse skin with water/shower. In case of skin irritation, consult a physician.
Rinse cautiously with water for several minutes. In case of eye irritation consult an ophthalmologist.
Rinse mouth. Call a doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, alcohol resistant foam, dry extinguishing powder, carbon dioxide (CO2)
water jet
Combustible. Vapours can form explosive mixtures with air.
Vapours are heavier than air. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel Do not breathe vapour/spray. Avoid contact with skin and eyes. Avoidance of ignition sources.
Keep away from drains, surface and ground water. Explosive properties.
Absorb with liquid-binding material.
Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Aerosol or mist formation. Provide adequate ventilation. When not in use, keep containers tightly closed.
Store in a well-ventilated place. Keep container tightly closed.
Wash hands before breaks and after work.
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Type of material: NBR (Nitrile rubber). Material thickness: 0,4 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).
Use safety goggle with side protection.
Respiratory protection necessary at: Aerosol or mist formation. Type: ABEK (combined filters against gases and vapours, colour code: Brown/Grey/Yellow/Green).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Risk of ignition. In case of warming: Vapours can form explosive mixtures with air.
Violent reaction with: Oxygen, Strong oxidiser, Alkali metals, Aldehydes, Alkaline earth metal, Acids, Hydrogen, Sulphuric acid, Chlorine, => Explosive properties
Keep away from heat. Decomposition takes place from temperatures above: 450 °C.
Rubber articles, different plastics
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1105
- Shipping Name
- PENTANOLS
- Transport Class
- 3 (flammable liquids)
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1-Pentanol?
The signal word is warning.
What is the physical form of 1-Pentanol?
1-Pentanol is a liquid (fluid) with colourless color. It has characteristic odor.
What is the solubility of 1-Pentanol?
22 g/l at 20 °C
What is 1-Pentanol used for?
laboratory chemical
What are the hazard statements for 1-Pentanol?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour
- H315: Causes skin irritation
- H332: Harmful if inhaled
- H335: May cause respiratory irritation
What is the melting point of 1-Pentanol?
The melting point is -78 °C and the boiling point is 138 °C.