NextSDS Logo
Safety Data Sheet EN

GALORYL® ATH 709

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GALORYL® ATH 709

Regulatory Identifiers

CAS Number
N/A
UFI Code
M6K2-40HW-400G-0FT8

Identified Uses

Formulation of fertilizer products (Industrial use of the substance as coating agent) PC12: Fertilizers Professional use of fertilizers (containing the substance as coating agent) SU1: Agriculture, forestry, fishery PC12: Fertilizers Industrial use as coating agent for fertilizers Professional use of fertilizers (containing the substance as coating agent) SU1: Agriculture, forestry, fishery

Manufacturers & Suppliers

ARKEMA logo

ARKEMA

Specialty Surfactants 420 rue d'Estienne d'Orves 92705 Colombes Cedex, FRANCE

+33 (0)1 49 00 80 80

http://www.arkema.com

Emergency Contacts

Emergency Contact

+33 1 49 00 77 77

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear eye protection and face protection.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P391 Collect spillage.
P501 Dispose of contents or container to an approved waste disposal plant.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Contains unclassified mineral oils and waxes, note N/L

Chemical Name CAS Number Concentration Hazardous
Lubricating oils EC: 278-012-2 74869-22-0 50 - 70% Yes
N/A --- 1 - 3% Yes
Fatty acids, C16-18, compds. with C16-18-alkyl amines EC: 800-984-9 1428547-35-6 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Oxygen or artificial respiration if needed. In case of persistent problems: Hospitalise.

Skin contact

Wash off immediately with soap and plenty of water.

Eye contact

Wash well-open eyes immediately, abundantly and thoroughly with water. Consult an ophthalmologist.

Ingestion

Do NOT induce vomiting. Consult a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide, dry powder extinguishers., Use suitable means to extinguish neighbouring fires.

Unsuitable media

Water jet.

Specific hazards

Formation of toxic products through combustion: nitrogen oxides, Carbon oxides, phosphorous oxides, Aldehydes, Ketones, Organic derivatives

Instructions

Cool closed containers exposed to fire with water spray.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Complete suit protecting against chemicals.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear suitable protective clothing, gloves and eye/face protection. Ensure adequate ventilation. Evacuate area of all unnecessary personnel.

Environmental

Do not release into the environment.

Cleanup methods

Keep in suitable, closed containers for disposal. Collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Sweep up to prevent slipping hazard.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Smoking, eating and drinking should be prohibited in the application area.

Storage

Keep container tightly closed in a dry and well-ventilated place. Provide impermeable floor.

Hygiene

Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate exhaust ventilation at machinery.

Hands

Heat insulating gloves Protective gloves complying with EN 374. Request information on glove permeation properties from the glove supplier., The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eyes

Safety glasses with side-shields conforming to EN166

Respiratory

Recommended Filter type: ABEK-filter In the case of vapour formation use a respirator with an approved filter. Avoid breathing vapor or mist. For emergency and other conditions where there may be a potential for significant exposure, use an approved full-face positive-pressure, self-contained breathing apparatus or positive-pressure airline with auxiliary self-contained air supply.

Skin/Body

Protective suit

Environmental

See chapter 6

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Decomposition Temperature
No data available.
Kinematic Viscosity
Not applicable
Properties Status
---
Boiling Point
No data available.
Explosive Limits
---
Physical State Data
solid
Dynamic Viscosity
---
Auto Ignition Temperature
No data available.
Flammability
Not relevant
Bulk Density
---
Partition Coefficient
AMINES, C16-18 (EVEN NUMBERED)-ALKYL, SALTS WITH PHOSPHORIC ACID, MONO-AND DI-C16-18 (EVEN NUMBERED) ALKYL ESTERS : May be considered as comparable to a similar product for which experimental results are: (Z)-OCTADEC-9-ENYLAMINE : log Kow : 4,33 , at 25 °C (measured) FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : log Kow : = 4 , at 20 °C, Expert judgement (OECD Test Guideline 107)
Relative Evaporation Rate
---
Upper Explosive Limit
No data available.
Density
---
Vapor Pressure
No data available.
Physical State
solid (20 °C) liquid (90 °C)
Lower Explosive Limit
No data available.
Odor
No data available.
Relative Density
No data available.
Crystallisation Point
---
Odor Threshold
No data available.
Evaporation Rate
---
Voc Content
---
Softening Point
---
Colour
yellowish
Solubility In Water
No data available.
Form
---
Colour Intensity
---
Freezing Point
---
Vapor Density
---
Solubility In Fat
---
Solidification Point
---
Solubility
---
Cloud Point
---
Metal Corrosion
---
Appearance
---
Flash Point
> 149 °C
Molecular Weight
---
Melting Point
No data available.
Ph
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No data available.

Reactivity

Stable under recommended storage conditions.

Hazardous reactions

No data available.

Avoid

No data available.

Incompatible

Strong oxidizing agents

Decomposition

Formation of toxic products through combustion: nitrogen oxides, Carbon oxides, phosphorous oxides, Aldehydes, Ketones, Organic derivatives

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (AMINES, C16-18 (EVEN NUMBERED)-ALKYL, SALTS WITH PHOSPHORIC ACID, MONO- AND DI-C16-18 (EVEN NUMBERED) ALKYL ESTERS, FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES)
Transport Class
9
Packing Group
III
IMDG

EmS Number: F-A, S-F Mark: MP

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GALORYL® ATH 709?

The signal word is warning.

What is the physical form of GALORYL® ATH 709?

GALORYL® ATH 709 is a solid (20 °c) liquid (90 °c) with yellowish color. It has no data available. odor.

What is GALORYL® ATH 709 used for?

Formulation of fertilizer products (Industrial use of the substance as coating agent) PC12: Fertilizers Professional use of fertilizers (containing the substance as coating agent) SU1: Agriculture, forestry, fishery PC12: Fertilizers Industrial use as coating agent for fertilizers Professional use of fertilizers (containing the substance as coating agent) SU1: Agriculture, forestry, fishery

What are the hazard statements for GALORYL® ATH 709?

This substance has 2 hazard statements:

  • H319: Causes serious eye irritation.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of GALORYL® ATH 709?

The melting point is No data available. and the boiling point is No data available..

Compliance Scanner

Scan your compliance