NextSDS Logo
Safety Data Sheet EN

GALVATECH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GALVATECH

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

Anti-corrosion agent, Metal surface treatment

Uses advised against

No uses advised against known

Manufacturers & Suppliers

T

TEC7

distributor

Industrielaan 5B, B-2250 Olen

+32 14 85 97 37

N

Novatech International N.V.

manufacturer

Industrielaan 5B, B-2250 Olen

+32 14 85 97 37

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Eye Irrit. Cat. 2 H319
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P264 Wash hands thoroughly after handling.
P280 Wear eye protection.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122°F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
zinc powder - zinc dust (stabilised) EC: 231-175-3 7440-66-6 25 - 50% Yes
dimethyl ether EC: 204-065-8 115-10-6 25 - 50% Yes
acetone EC: 200-662-2 67-64-1 10 - 12.5% Yes
hydrocarbons, C9, aromatics EC: 918-668-5 --- 5 - 10% Yes
reaction mass of ethylbenzene and xylene EC: 905-588-0 --- 5 - 10% Yes
zinc oxide EC: 215-222-5 1314-13-2 2.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.

Symptoms: No effects known.

Skin contact

If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water. If irritation persists, consult a doctor/medical service.

Symptoms: No effects known.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult a doctor/medical service.

Symptoms: Irritation of the eye tissue.

Ingestion

Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.

Symptoms: No effects known.

Immediate Medical Attention

In case of injury and/or intoxication, call the European emergency number 112.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Small fire: Water, Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting CO2 extinguisher. Major fire: Quantities of water.

Specific hazards

Upon combustion CO and CO2 are formed and formation of metal oxides. Pressurised container: May burst if heated.

Instructions

Physical explosion risk: extinguish/cool from behind cover. Do not move the load if exposed to heat. If exposed to fire cool the closed containers by spraying with water. After cooling: persistent risk of physical explosion.

Firefighter Protection

Gloves (EN 374). Protective goggles (EN 166). Protective clothing (EN 14605 or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighting equipment.

Environmental

Contain released product. Dam up the liquid spill. Prevent soil and water pollution. Prevent spreading in sewers.

Cleanup methods

Take up liquid spill into absorbent material. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers. Clean contaminated surfaces with an excess of water.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Gas/vapour heavier than air at 20°C. Observe normal hygiene standards.

Storage

Storage temperature: < 50 °C. Meet the legal requirements. Keep container in a well-ventilated place. Fireproof storeroom. Keep out of direct sunlight.

Hygiene

Observe normal hygiene standards.

Fire prevention

Keep away from naked flames/heat. Keep away from ignition sources/sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly.

Hands

Protective gloves against chemicals (EN 374). Materials: nitrile rubber, Measured breakthrough time: >480 minutes, Thickness: 0.7 mm, Protection index: Class 6

Eyes

Protective goggles (EN 166).

Respiratory

Full face mask with filter type A at conc. in air > exposure limit.

Skin/Body

Protective clothing (EN 14605 or EN 13034).

Environmental

See sections 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
Grey
Colour
Grey
Colour Intensity
---
Form
Aerosol
Odor
Solvent-like odour
Odor Threshold
No data available in the literature
Ph
Not applicable (aerosol)
Melting Point
Not applicable (aerosol)
Boiling Point
Not applicable (aerosol)
Flash Point
Not applicable (aerosol)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
4000 hPa ; 20 °C ; Propellant
Vapor Density
---
Relative Density
1.2 ; 20 °C ; Liquid
Bulk Density
---
Density
1200 kg/m³ ; 20 °C ; Liquid
Flammability
Extremely flammable aerosol.
Upper Explosive Limit
26.2 vol %
Lower Explosive Limit
2.6 vol %
Explosive Limits
---
Auto Ignition Temperature
Not applicable (aerosol)
Decomposition Temperature
No data available in the literature
Solubility
---
Partition Coefficient
Not applicable (mixture)
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable (aerosol)
Kinematic Viscosity
Not applicable (aerosol)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Unstable on exposure to heat.

Reactivity

May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.

Hazardous reactions

No data available.

Avoid

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks.

Incompatible

No data available.

Decomposition

Upon combustion CO and CO2 are formed and formation of metal oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
aerosols
IMDG

190, 277, 327, 344, 381, 63, 959

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GALVATECH?

The signal word is danger.

What is the physical form of GALVATECH?

GALVATECH is a aerosol appearing as grey with grey color. It has solvent-like odour odor.

What is GALVATECH used for?

Anti-corrosion agent, Metal surface treatment

What are the hazard statements for GALVATECH?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of GALVATECH?

The melting point is Not applicable (aerosol) and the boiling point is Not applicable (aerosol).