Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYSTYROL 158 K GR 2 CRYSTAL CLEAR 00013
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer, for industrial processing only
Manufacturers & Suppliers
Styrolution GmbH
manufacturer
Erlenstrasse 2 60325 Frankfurt, GERMANY
+49 621 60-41446
http://www.styrolution.com
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on: polystyrene
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polystyrene | 9003-53-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation of decomposition products, remove the affected person to a source of fresh air and keep calm. Provide medical aid.
Areas affected by molten material should be quickly placed under cold running water.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water.
Rinse mouth and then drink plenty of water.
Immediate Medical Attention
Burns caused by molten material require hospital treatment. If irritation develops [in eyes], seek immediate medical attention. If difficulties occur [after ingestion]: Seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam, carbon dioxide
The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation.
Discharge into the environment must be avoided.
Sweep/shovel up
Related Products
Similar products with comparable safety profiles
STARKE CRYSTAL CLEAR GLASS POLISH
---
ROCRYL™ 430 (HPA-LA)
CAS: 25584-83-2
ROCRYL™ 430 (HPA-LA)
CAS: 25584-83-2
PROPYLENE-POLYMER GRADE
CAS: 115-07-1
LOCTITE C 511 96SC 3C 0.23MM GN known as 96SC CRYSTAL 511 3C
---
Polystyrene standard, M.W. 1,300
CAS: 9003-53-6
ARCOL POLYOL 1107
---
ARCOL® POLYOL F-3040
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice.
Protect against moisture. Avoid extreme heat. Avoid all sources of ignition: heat, sparks, open flame.
Handle in accordance with good industrial hygiene and safety practice.
Avoid dust formation. Dust can form an explosive mixture with air.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use additional heat protection gloves when handling hot molten masses (EN 407), e.g. of textile or leather.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Breathing protection if dusts are formed. Particle filter with low efficiency for solid particles (e.g. EN 143 or 149, Type P1or FFP1)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reactions known.
Avoid extreme heat. Avoid all sources of ignition: heat, sparks, open flame.
strong oxidizing agents
monomers, oxides, gases/vapours, hydrocarbons, cyclic low molecular weight oligomers, Gaseous products of degradation can be given off if the product is greatly overheated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYSTYROL 158 K GR 2 CRYSTAL CLEAR 00013?
The signal word is no signal word.
What is the physical form of POLYSTYROL 158 K GR 2 CRYSTAL CLEAR 00013?
POLYSTYROL 158 K GR 2 CRYSTAL CLEAR 00013 is a solid with colourless, clear color. It has faint specific odour odor.
What is POLYSTYROL 158 K GR 2 CRYSTAL CLEAR 00013 used for?
Polymer, for industrial processing only