NextSDS Logo
Safety Data Sheet EN

Mykal Electrical & Cable Cleaner Wipes

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Mykal Electrical & Cable Cleaner Wipes
Product Code
20420008

Regulatory Identifiers

CAS Number
N/A
UFI Code
VS59-2UUM-WV16-D1UF

Identified Uses

Cleaning agent, Cleaner solvent, PC35 Washing and cleaning products (including solvent based products), SU3 Industrial uses, SU22 Professional uses

Uses advised against

All uses other than those identified

Manufacturers & Suppliers

ZEP UK Ltd logo

ZEP UK Ltd

manufacturer

Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom

+44 (0)151 422 1000

http://www.zep.co.uk

Z

ZEP Industries BV

distributor

Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands

+31 164 250 100

ZEP ITALIA SRL logo

ZEP ITALIA SRL

distributor

Piazzale Luigi Cadorna, 2 - Milano - (MI) 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000 04011 Aprilia (LT) - Italy

+39.06.926691

http://www.zep.it

Emergency Contacts

NHS

+44 0845 46 47

NHS

+44 08454 24 24 24

emergency number (europe)

112

NPIC (public)

+353 (0) 1 809 2166

NPIC (Healthcare professional)

+353 (0) 1 809 2566

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Skin Sens. Cat. 1 H317
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P331 Do NOT induce vomiting.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 926-141-6 64742-47-8 75 - 100% Yes
(R)-p-mentha-1,8-diene EC: 227-813-5 5989-27-5 10 - 25% Yes
7-methyl-3-methylenocta-1,6-diene EC: 204-622-5 123-35-3 0.1 - 0.25% Yes
alpha-Pinene EC: 201-291-9 80-56-8 0.1 - 0.25% Yes
thuj-4(10)-ene EC: 222-212-4 3387-41-5 0.1 - 0.25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin contact

Immediately rinse with water. If skin irritation continues, consult a doctor.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately.

Immediate Medical Attention

Call for medical help immediately.

Medical Treatment

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

No further relevant information available.

Firefighter Protection

Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons from danger area. Keep unprotected persons away.

Environmental

Inform respective authorities in case of seepage into water course or sewage system. Keep contaminated washing water and dispose of appropriately.

Cleanup methods

Absorb with liquid-binding material.

Materials: sand, diatomite, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Store in cool, dry place in tightly closed receptacles. Prevent formation of aerosols.

Storage

Store in cool, dry place in tightly closed receptacles. Store only in the original receptacle.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see section 7.

Hands

Protective gloves. Material of gloves: Nitrile rubber, NBR; PVC gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves

Eyes

Goggles recommended during refilling

Respiratory

Filter A

Skin/Body

Protective work clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not determined.
Relative Evaporation Rate
---
Colour
White
Form
Liquid on inert carrier material
Boiling Point
240 °C
Colour Intensity
---
Vapor Density
Not determined.
Density
0.8 g/cm³
Dynamic Viscosity
2 mPas
Softening Point
---
Melting Point
---
Cloud Point
---
Solubility In Fat
---
Relative Density
---
Solubility
---
Bulk Density
2 kg/m³
Partition Coefficient
Not applicable.
Odor Threshold
Not determined.
Auto Ignition Temperature
230 °C
State Under Standard Conditions
---
Odor
Characteristic
Appearance
---
Ph
---
Physical State Data
liquid
Upper Explosive Limit
6 Vol %
Lower Explosive Limit
0.6 Vol %
Voc Content
---
Solubility In Water
Insoluble.
Molecular Weight
---
Solidification Point
---
Flash Point
67 °C
Physical State
Liquid
Crystallisation Point
---
Vapor Pressure
0.1 hPa
Explosive Limits
---
Properties Status
---
Flammability
Not applicable.
Decomposition Temperature
Not defined.
Metal Corrosion
---
Freezing Point
---
Kinematic Viscosity
20.5 mm²/s
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Transport Class
9
Packing Group
III
ADR

Warning: Miscellaneous dangerous substances and articles.

IMDG

Warning: Miscellaneous dangerous substances and articles.

IATA

Warning: Miscellaneous dangerous substances and articles.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Mykal Electrical & Cable Cleaner Wipes?

The signal word is danger.

What is the physical form of Mykal Electrical & Cable Cleaner Wipes?

Mykal Electrical & Cable Cleaner Wipes is a liquid with white color. It has characteristic odor.

What is Mykal Electrical & Cable Cleaner Wipes used for?

Cleaning agent, Cleaner solvent, PC35 Washing and cleaning products (including solvent based products), SU3 Industrial uses, SU22 Professional uses

What are the hazard statements for Mykal Electrical & Cable Cleaner Wipes?

This substance has 4 hazard statements:

  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H411: Toxic to aquatic life with long lasting effects.