Premier Klercide-CR Sterile Biocide Y Unit Dose Concentrate, Klercide-CR Biocide Y Unit Dose Concentrate

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Call a doctor immediately. Take affected persons out of danger area and into the open air.

Symptoms: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing.

Instantly wash with water and soap and rinse thoroughly. Consult a doctor for safety reasons.

Symptoms: Severe burns may occur.

Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Seek medical attention.

Symptoms: Corneal burns may occur. May cause permanent damage.

Drink copious amounts of water and provide fresh air. Instantly call for doctor. Rinse out mouth and then drink plenty of water. Do not induce vomiting - Danger of perforation! If swallowed, seek medical advice immediately and show this container or label.

Symptoms: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose.

Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.

None known

Corrosive. Non flammable. In combustion emits toxic fumes.

Wear protective clothing and keep away unprotected persons. Ensure adequate ventilation. Avoid skin and eye contact. Do not breathe vapours.

Do not allow to enter drainage system, surface or ground water. Prevent material from reaching sewage system, holes and cellars.

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Send for recovery or disposal in suitable containers.

Materials: sand, diatomite, acid binders, universal binders, sawdust

Avoid skin and eye contact under any circumstances. Do not inhale vapours/aerosols. Open and handle container with care. Make sure that all applicable workplace limits are observed.

Keep container tightly sealed. Store in cool, dry conditions. Protect from frost.

No special measures required.

A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

Wear PVC gloves (AS2161).

Chemical safety goggles (AS1336/1337).

Wear an approved P1 respirator where dusts/vapours are formed (AS/NZS1715/1716).

Impervious coveralls and safety footwear (AS3765/2210).

Product is stable under directed conditions of use, storage and temperature.

No data available.

Avoid excessive heat, generating dust, direct sunlight, static discharges, moisture and high temperatures.

None.

In combustion emits toxic fumes.