KETRUL D 70

In case of exposure to intense concentrations of vapours, fumes or spray, transport the person away from the contaminated zone, keep warm and allow to rest.

Symptoms: Vapors inhaled in strong concentration have a narcotic effect on the central nervous system.

Remove contaminated clothing and shoes. Wash off with soap and water.

Symptoms: Non-irritating during normal use.

Rinse thoroughly with plenty of water, also under the eyelids. Keep eye wide open while rinsing.

Symptoms: Burning feeling and temporary redness.

Do not ingest If swallowed then seek immediate medical assistance. Risk of product entering the lungs on vomiting after ingestion. In this case, the casualty should be sent immediately to hospital.

Symptoms: If swallowed accidentally, the product may enter the lungs due to its low viscosity and lead to the rapid development of very serious pulmonary lesions (medical survey during 48 hours). Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Foam. Dry powder. Carbon dioxide (CO₂).

Do not use a solid water stream as it may scatter and spread fire.

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Evacuate non-essential personnel.

Use personal protective equipment. Evacuate non-essential personnel. Ensure adequate ventilation, especially in confined areas. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Remove all sources of ignition. Stop all work that requires a naked flame, stop all vehicles, stop all machines and equipment that may cause sparks or flames.

Dike to collect large liquid spills.

Prevent further leakage or spillage if safe to do so. Dike to collect large liquid spills. The product should not be allowed to enter drains, water courses or the soil. Local authorities should be advised if significant spillages cannot be contained. See Section 12 for additional Ecological Information.

Use non-sparking handtools and explosionproof electrical equipment. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Following product recovery, flush area with water.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Precautions for safe handling Advice on safe handling For personal protection see

Ensure adequate ventilation. Do not spray at high pressure (> 3 bar). WHILE MOVING THE PRODUCT.: To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Do not allow splash loading and ensure that the product is poured slowly, particularly at the beginning of the operation. When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment. Apply technical measures to comply with the occupational exposure limits.

Protective gloves.

If splashes are likely to occur, wear: Safety glasses with side-shields.

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

Wear suitable protective clothing. Protective shoes or boots.

Design installations (machinery and equipment) to prevent burning product from spreading (tanks, retention systems, interceptors (traps) in drainage systems). Storage installations should be designed with adequate bunds so as to prevent ground or water pollution in case of leaks or spills.

Stable under recommended storage conditions.

No information available.

None under normal processing.

Heat, flames and sparks. Take precautionary measures against static discharges.

Strong acids. Oxidizing agents.

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot.