Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Komelol ME B422
- Product Code
- 960 042
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for coatings Benzoguanamine-formaldehyde resin
Uses advised against
No information.
Manufacturers & Suppliers
Melamin d.d. Kočevje
manufacturer
Tomšičeva 9 1330 Kočevje, Slovenia
+386 1 8959 300
Manufacturer
manufacturer
+386 1 8959 360
Emergency Contacts
Emergency Contact
112
Manufacturer
+386 1 8959 360
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| BENZOGUANEMINE RPW FORMALDEHYDE, ETHYLATED, METHYLATED | 68037-08-1 | 90 - 100% | Yes |
| formaldehyde EC: 200-001-8 | 50-00-0 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove patient to fresh air - move out of dangerous area. If symptoms persist, seek medical attention.
Wash affected areas of skin with plenty of water. Take off all contaminated clothing.
Immediately flush eyes with running water, keeping eyelids apart. If irritation persists, seek professional medical attention.
In case of doubt or if feeling unwell seek medical help. Do not induce vomiting without prior consultation with a doctor. Rinse mouth thoroughly with water.
Immediate Medical Attention
If symptoms persist, seek medical attention. If irritation persists, seek professional medical attention. In case of doubt or if feeling unwell seek medical help.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry chemical powder. Water spray. Alcohol resistant foam.
Full water jet.
In case of heating harmful vapours/gases can be generated.
Cool containers at risk with water spray. If possible remove containers from endangered area.
Firefighter Protection
Firefighters should wear appropriate protective clothing for firefighters (including helmets, protective boots and gloves) (EN 469) and self-contained breathing apparatus (SCBA) with a full face-piece (EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No information.
Do not allow product to reach water/drains/sewage systems or permeable soil.
Absorb product (with inert material), collect it in special container and dispose it to a licensed hazardous-waste disposal contractor.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Close the packaging tightly immediately after use.
Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not eat, drink or smoke while working.
Ensure adequate ventilation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and local exhaust in areas with increased concentration.
Observe the manufacturer's instructions regarding the use, storage, maintenance and replacement of gloves. In case of damage or at the first signs of wear and tear, change the gloves immediately. Follow the manufacturer’s instructions about permeability and penetration times and specific workplace conditions (mechanic load, exposure duration). Use chemical resistant gloves classified according to standard EN 374.
Safety glasses with side protection (EN 166).
Not needed under normal use and adequate ventilation. In case of insufficient ventilation wear suitable respiratory protection.
Wear suitable protective clothing. Protection for body must be selected by activity and possible exposure - use protective apron, protective boots, chemical protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under normal conditions of use, recommended handling and storage conditions.
No information.
No information.
No special precautions required. Consider the directions for use and storage.
Strong oxidising agents.
Under normal use conditions no hazardous decomposition products are expected. In case of fire/explosion vapours/gases that pose a health hazard are released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Komelol ME B422?
The signal word is no signal word.
What is the physical form of Komelol ME B422?
Komelol ME B422 is a liquid with colourless to slightly yellowish color. It has specific odor.
What is the solubility of Komelol ME B422?
No information.
What is Komelol ME B422 used for?
Raw material for coatings Benzoguanamine-formaldehyde resin
What are the hazard statements for Komelol ME B422?
This substance has 1 hazard statement:
- H413: May cause long lasting harmful effects to aquatic life.
What is the melting point of Komelol ME B422?
The melting point is No information. and the boiling point is ca. 100 °C.