NextSDS Logo
Safety Data Sheet EN

SikaGrout®-316

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SikaGrout®-316

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cement / Mortar

Manufacturers & Suppliers

S

Sika Deutschland GmbH

manufacturer

Kornwestheimer Str. 103-107, D-70439 Stuttgart

+49 711 8009 0

Emergency Contacts

Giftinformationszentrale Wien

0043 1 4064343

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1 H318
STOT SE Cat. 3 H335

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P501 Dispose of contents/container in accordance with local regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Cement (chromium reduced) EC: 266-043-4 65997-15-1 25 - 40% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Consult a physician after significant exposure.

Symptoms: Cough, Respiratory disorder, May cause respiratory irritation.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.

Symptoms: Erythema, Dermatitis, Causes skin irritation.

Eye contact

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Keep eye wide open while rinsing.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness, Excessive lachrymation, Causes serious eye damage.

Ingestion

Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Consult a physician after significant exposure. Seek medical advice.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Deny access to unprotected persons.

Environmental

Try to prevent the material from entering drains or water courses.

Cleanup methods

Pick up and arrange disposal without creating dust.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products

Storage

Keep container tightly closed in a dry and well-ventilated place. Store in accordance with local regulations. Keep in a dry place.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.

Fire prevention

Avoid dust formation.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation. This can be achieved by local exhaust extraction or by general ventilation. (EN 689 - Methods for determining inhalation exposure). This applies in particular to the mixing / stirring area.

Hands

Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Recommended: Butyl rubber/nitrile rubber gloves.

Eyes

Safety glasses with side-shields conforming to EN166. Eye wash bottle with pure water.

Respiratory

Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. particulate filter P. P1: Inert material; P2, P3: hazardous substances. In case this is not sufficient to keep the concentrations under the occupational exposure limits then respiration protection measures must be used.

Skin/Body

Dust impervious protective suit. Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionally recommended for mixing and stirring work.

Environmental

Try to prevent the material from entering drains or water courses.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
powder
Solubility In Water
insoluble
Relative Density
No data available
Vapor Pressure
No data available
Explosive Limits
---
Solubility In Fat
---
Softening Point
---
Colour
grey
Bulk Density
ca.1.400 kg/m3
Evaporation Rate
No data available
Flash Point
Not applicable
Crystallisation Point
---
Odor Threshold
No data available
Colour Intensity
---
Relative Evaporation Rate
---
Appearance
powder
Kinematic Viscosity
No data available
Melting Point
No data available
Voc Content
---
Partition Coefficient
No data available
Physical State Data
solid
Upper Explosive Limit
No data available
Ph
> 11 at 500,00 g/l
Lower Explosive Limit
No data available
Decomposition Temperature
No data available
Form
---
Flammability
No data available
State Under Standard Conditions
---
Density
No data available
Auto Ignition Temperature
No data available
Dynamic Viscosity
No data available
Boiling Point
No data available
Solidification Point
---
Vapor Density
---
Cloud Point
---
Freezing Point
No data available
Odor
odourless
Metal Corrosion
---
Solubility
---
Molecular Weight
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

Stable under recommended storage conditions.

Avoid

No data available

Incompatible

No data available

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SikaGrout®-316?

The signal word is danger.

What is the physical form of SikaGrout®-316?

SikaGrout®-316 is a powder appearing as powder with grey color. It has odourless odor.

What is SikaGrout®-316 used for?

Cement / Mortar

What are the hazard statements for SikaGrout®-316?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of SikaGrout®-316?

The melting point is No data available and the boiling point is No data available.