NextSDS Logo
Safety Data Sheet EN

SikaGrout®-212 HP AU

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SikaGrout®-212 HP AU

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

S

Sika Australia Pty. Ltd.

manufacturer

55 Elizabeth Street Wetherill Park, NSW 2164

+61 2 9725 11 45

Emergency Contacts

Emergency Contact

+61 1800 033 111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317
Carc. Cat. 1A H350
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
H350 May cause cancer by inhalation.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read.
P261 Avoid breathing dust.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Cement, portland, chemicals EC: 266-043-4 65997-15-1 30 - 60% No
Crystalline silica EC: 238-878-4 14808-60-7 30 - 60% No
sulfoaluminate clinker --- 1 - 3% No
Crystalline silica EC: 238-878-4 14808-60-7 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Consult a physician after significant exposure.

Symptoms: Cough, respiratory disorder, allergic reactions.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.

Symptoms: Irritant effects, dermatitis.

Eye contact

Rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Keep eye wide open while rinsing.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.

Symptoms: Irritant effects.

Immediate Medical Attention

Obtain medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Follow AS/NZS 1337.1 Recommended: Butyl rubber, PVC, cotton gloves

Eyes

Safety glasses

Respiratory

In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. particulate filter P

Skin/Body

Protective clothing (e.g. safety shoes, long-sleeved working clothing, long trousers) Follow AS 2210:3

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
No data available
Form
---
Density
ca. 1.8 g/cm3 (23 ℃ (73 ºF))
Kinematic Viscosity
Not applicable
Colour
grey
Physical State Data
---
Freezing Point
---
Relative Density
---
Bulk Density
---
Vapor Pressure
No data available
Metal Corrosion
---
Partition Coefficient
No data available
Explosive Limits
---
Relative Evaporation Rate
---
Voc Content
Not applicable
Solubility In Fat
---
Auto Ignition Temperature
No data available
Evaporation Rate
No data available
Decomposition Temperature
No data available
Boiling Point
No data available
Colour Intensity
---
Melting Point
No data available
Crystallisation Point
---
Upper Explosive Limit
No data available
Solubility
---
Solidification Point
---
Flash Point
Not applicable
State Under Standard Conditions
---
Lower Explosive Limit
No data available
Cloud Point
---
Physical State
---
Ph
Not applicable
Properties Status
---
Vapor Density
---
Molecular Weight
---
Odor Threshold
No data available
Flammability
No data available
Dynamic Viscosity
No data available
Appearance
powder
Softening Point
---
Odor
characteristic
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SikaGrout®-212 HP AU?

The signal word is danger.

What are the hazard statements for SikaGrout®-212 HP AU?

This substance has 5 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.
  • H350: May cause cancer by inhalation.

What is the melting point of SikaGrout®-212 HP AU?

The melting point is No data available and the boiling point is No data available.

Compliance Scanner

Scan your compliance