Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polimix 740N
- Chemical Name
- Polyester of 1,6-hexanediol with alcohols and glycols
Regulatory Identifiers
- CAS Number
- NOT AVAILABLE-- Check regulations →
- EC Number
- NOT AVAILABLE-- Check regulations →
- REACH No.
- EXEMPT
Identified Uses
Is a plasticizer, that is a substance incorporated into a plastic material to increase its flexibility, softness, distensibility or workability.
Manufacturers & Suppliers
Polynt S.p.A.
manufacturer
Via del Pruneto 40, 52027 San Giovanni Valdarno (AR), ITALY
++39 055 91281
Polynt S.p.A.
distributor
Via Enrico Fermi 51, 24020 Scanzorosciate (BG), ITALY
++39 035 652 111
Emergency Contacts
Carechem 24 International (h24) Europe
+44 1235 239670
h24
Carechem 24 International (h24) Middle East/Africa
+44 1235 239671
h24
Carechem 24 International (h24) Americas
+1 215 207 0061
h24
Carechem 24 International (h24) Asia-Pacific
+65 3158 1412
h24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyester of 1,6-hexanedioic acid with alcohols and glycols. | --- | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the casualty into the fresh air. Consult a doctor if the person has difficulty in breathing
In the case of contact with the skin, wash immediately with abundant soap and water.
For eye contact, flush eyes with running water for at least 15 minutes. Hold eyelids apart to ensure rinsing of the entire surface of the surface of the eyes and lids with water. Get medical attention.
Do not induce vomit. If vomiting takes place naturally, bend the person forward to prevent suffocation hazard. Consult a doctor.
Immediate Medical Attention
Consult a doctor if the person has difficulty in breathing (inhalation). Get medical attention (eye). Consult a doctor (ingestion).
Medical Treatment
See section 4.1
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, carbon dioxide (CO2), powder, water spray.
Do not use water jets as they can disperse and spread fire.
If involved in a fire, remember it can produce toxic gases.
Use atomized water to cool closed containers in a fire
Firefighter Protection
Use personal protective equipment. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Move any people not authorized to contain the emergency out of the area. Avoid coming in contact with the substance or handling containers without adequate protection. Eliminate all sources of ignition. Remove all incompatible materials as outlined in section 10.5 of SDS.
Contain the spillage as far as possible. Prevent spilled materials getting into the drainage system, wells, surface water or groundwater.
vacuum up the spilled material and/or absorb parts that can't be vacuumed up with inert materials and place in suitable containers (separate liquids and solids)
Materials: sand, earth, absorbent materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Take precautionary measures against static discharges. Avoid breathing vapors.
Keep in a cool, dry and well-ventilated place. Keep the recipient tightly closed.
Do no eat, drink or smoke when using this product. Wash face, hands and mouth thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure the premises where the substance is stored/handled are adequately ventilated, cool and dry.
Suitable chemical resistant safety gloves (EN 374) e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), PVC (0.7 mm) and other. Consult the glove manufacturer for specific information on the suitability of the gloves. Replace the gloves in the case of internal contamination, when punctured, or if external contamination cannot be removed. The practical usage time depends on many conditions, see manufacturer's directions.
Safety goggles or visor (EN 166)
when vapors concentrations exceed permissible exposure limits, wear respiratory protection. Gas filter EN 141 type A for gases and vapors of organic compounds (boiling point >65°C).
Use suitable protective clothing for chemical substances.
See sections 6.2 and 13.1.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in normal conditions
Stable in normal conditions
Not relevant
See Section 6
Incompatible with oxidising agents.
See Section 5.2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polimix 740N?
The signal word is no signal word.
What is the physical form of Polimix 740N?
Polimix 740N is a liquid with pale yellow color. It has characteristic odour odor.
What is the solubility of Polimix 740N?
NOT AVAILABLE
What is Polimix 740N used for?
Is a plasticizer, that is a substance incorporated into a plastic material to increase its flexibility, softness, distensibility or workability.
What is the melting point of Polimix 740N?
The melting point is NOT AVAILABLE and the boiling point is > 350 °C.