NextSDS Logo
Safety Data Sheet EN

THERMOGRIP 443 (*)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
THERMOGRIP 443 (*)
Product Code
068221 +

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hotmelt adhesive.

Manufacturers & Suppliers

B

BOSTIK SA (*)

manufacturer

Immeuble IRIS - F - 92062 PARIS LA DEFENSE CEDEX 12, place de l'Iris La Défense 2 - 92400 COURBEVOIE - FRANCE

+ 33 (0)1 47 96 94 65

Emergency Contacts

ORFILA (PARIS-FRANCE)

+ 33 (0)1 45 42 59 59

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

EVA based adhesive (Ethylene-VinylAcetate)

Chemical Name CAS Number Concentration Hazardous
Ethylene-VinylAcetate --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

Cool the skin immediately with cold water, treat burns according to their severity.

Eye contact

Cool the affected areas immediately with cold water.

Immediate Medical Attention

Consult a doctor. Seek advice of an ophthalmologist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide, dry powder extinguishers.

Unsuitable media

Water (risk of spreading).

Specific hazards

Possible formation of irritating fumes in case of fire.

Firefighter Protection

Wear a self contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

If molten : leave to cool and harden, then collect.

Cleanup methods

Scrape up the floor. Clean if necessary with an appropriate solvent. Collect residues in a labelled container.

—

Related Products

Similar products with comparable safety profiles

T

THERMOVIT 300 GRIS ARGENT

---

H

Hydrotherm 46 M A 8480206 RT

---

M

MultiTherm PG-1®

---

1

125/G139 - SUREGRIP (ALL COLOURS)

UFI: TD8P-V2N3-0004-CD6U

T

TECHNOMELT PUR 4655 ME

---

T

TECHNOMELT PUR 4655 ME

---

P

POLITECH GREASE SPRAY 2400899

---

P

PATEX 435/SL

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear protective clothing. Wear heat resistant gloves and eye/face protection (for example a visor). Avoid breathing any fumes or vapours emitted. Risk of burns if hot. Use dry adhesive (not wet or damp). Do not overheat the adhesive; avoid local overheating in machines. Avoid flames or sparks near molten adhesive.

Storage

Recommended: Dry, cool and well ventilated place. To avoid: Rain and damp. Heat (product may become soft and sticky).

Fire prevention

Avoid flames or sparks near molten adhesive.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If hot : provide for fresh air intake and/or adequate air extraction in plants.

Hands

Heat resistant gloves.

Eyes

Protective goggles.

Skin/Body

Heat resistant apron.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid at 20°C.
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
White.
Colour Intensity
---
Form
Pellets.
Odor
---
Odor Threshold
---
Ph
Not applicable.
Melting Point
---
Boiling Point
---
Flash Point
> 200 °C
Freezing Point
---
Softening Point
106 - 113 °C
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
Around 950 kg/m3 at 23 °C.
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Insoluble and not miscible in water; Soluble in chlorinated solvents.
Partition Coefficient
---
Solubility In Water
Insoluble and not miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal storage and handling temperatures.

Avoid

Do not overheat adhesive during usage.

Decomposition

Possible formation of irritating vapours above the advised use temperature.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Incinerate at approved waste disposal sites only.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Conforms to Directive 'Dangerous substances' 67/548/EEC, 'Dangerous preparations' 1999/45/EC, and 'Safety data sheets' 2001/58/EC. Symbol(s): None.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for THERMOGRIP 443 (*)?

The signal word is no signal word.

What is the physical form of THERMOGRIP 443 (*)?

THERMOGRIP 443 (*) is a solid at 20°c. with white. color.

What is the solubility of THERMOGRIP 443 (*)?

Insoluble and not miscible in water; Soluble in chlorinated solvents.

What is THERMOGRIP 443 (*) used for?

Hotmelt adhesive.