Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pakoflex 110 SA
- Product Form
- Thermoplastic Polyurethane
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyurethane granules for textile coating
Manufacturers & Suppliers
EPAFLEX POLYURETHANES srl
manufacturer
Via Circonvallazione Est, 8, I – 27023 Cassolnovo (PV) Italy
Emergency Contacts
Emergency Contact
+39 0381 929521
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions set forth in Directives 67/548/EEC and/or EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements)
Notes
Information not relevant for mixtures
First Aid Measures
Emergency procedures for chemical exposure incidents
In case vapours from combustion or degradation are inhaled, move the person from the contaminated area and seek medical advice
Cool down the part involved with plenty of water or ice. Seek medical advice for further treatment and removal of the molten product
Symptoms: Molten product can cause skin burns.
Remove from the eye and irrigate copiously with clean fresh water for at least 15 minutes
Immediate Medical Attention
Seek medical advice
Medical Treatment
Follow the indications given by the doctor
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Conventional extinguishing media are suitable: nebulised water, foam, dry chemical.
Do not use water jets.
combustion products can be toxic or dangerous
Use jets of water to cool the containers to prevent product decomposition and development of substances that could be dangerous to health.
Firefighter Protection
In case of fire or combustion wear self contained breathing apparatus (SCBA) and protective clothing. Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use adequate equipment if fumes or powders are released into the air. Do not walk over granules if product is released on the floor to avoid slipping.
Do not sweep or flush product into sewers or waterways.
Sweep up carefully and place into a container for reuse or disposal. Collect released granules using mechanical devices or aspirators.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protect from humidity and from temperatures above 40 °C. Store the containers closed and distant from containers of ketonic solvents that, if released, can swell the material. Conduct any operation emitting fumes or vapours (melt processing, pre-drying, post curing) under well ventilated conditions.
Protect from humidity and from temperatures above 40 °C. Store the containers closed and distant from containers of ketonic solvents.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use gloves if contact with molten product is foreseeable
None required
Use a protective mask if dust or powder is released by granules
Use adequate working clothes if contact with molten product is foreseeable
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage
There are no particular risks of reaction with other substances in normal conditions of use
No hazardous reactions are foreseeable in normal conditions of use and storage
None particular, use the standard precautions taken in handling chemical products
Keep distant from solvents to avoid swelling after spillage of solvents
Thermal decomposition may start at > 240 °C. In case of thermal decomposition / overheating harmful gases and vapours can be evolved. Dangerous decomposition products may include CO and CO₂ and small amounts of nitrogen oxides, amines, nitriles, aromatic and aliphatic hydrocarbons, aldehydes, cyanidric acid and isocyanates and/or combinations of the previous, and smoke
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pakoflex 110 SA?
The signal word is no signal word.
What is the physical form of Pakoflex 110 SA?
Pakoflex 110 SA is a solid appearing as natural granulate with pail yellow color. It has almost odourless odor.
What is Pakoflex 110 SA used for?
Polyurethane granules for textile coating