SINLOIHI FZ-5005

Remove the casualty into fresh air and keep at rest.

Take off immediately all contaminated clothing. Wash contaminated clothing before reusing. Wash skin thoroughly with soap and water or use recognised skin cleanser.

Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Begin with medical treatment.

If swallowed, rinse mouth with water (only if the person is conscious). Do not induce vomiting unless directed to do so by medical personnel. Seek medical attention.

Extinguishing measures to suit surroundings. In case of fire, use water spray jet, dry extinguishing powder, foam or carbon dioxide.

water jet

Organic pigments may smolder or burn when involved in a fire or exposed to high temperatures for an extended period of time.

Use extinguishing media suitable for surrounding materials.

Do not discharge into the drains / surface waters / groundwater. Prevent spread over a wide area e.g. by containment or oil barriers.

Vacuum or sweep up material and place in a designated, labelled waste container.

Keep away from sources of ignition. Avoid the creation of dust. Provide good ventilation of working area. Take precautionary measures against electrostatic discharges.

Store in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers.

Keep away from sources of ignition. Eliminate all ignition sources.

Wear protective gloves in cases of prolonged contact (DIN EN 374). Protective gloves should in any case be tested for workplace-specific suitability (e.g. mechanical resistance, product compatibility, antistatic properties). Comply with instructions and information provided by the glove manufacturer concerning use, care and replacement of the gloves. Replace protective gloves immediately upon damage or at the first signs of wear. As far as possible, plan work procedures so that wearing gloves will not be necessary.

Safety goggles with lateral shielding (DIN EN 166)

If the occupational exposure limits are exceeded, suitable respiratory protective equipment must be worn. If no occupational exposure limits are defined, sufficiently effective respiratory protective measures must be taken in the presence of dust.

Usual working clothes for the chemical industry, suitable for the job.

Keep away from moisture.

No hazardous reactions when stored and handled according to prescribed instructions.

Thermal disintegration depends to a great extent on the external conditions. A complex mixture of solids, liquids and gases forms in the air, including among other substances carbon dioxide, carbon monoxide and other organic compounds, when this material is burnt or is thermally or oxidatively degraded.