DeriTool 667

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.

Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.

If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.

alcohol resistant foam, carbon dioxide, Powder, spray mist, (water)

strong water jet

Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage.

Cool closed containers that are near the source of the fire.

Keep away from sources of ignition. Ventilate affected area. Do not breathe vapours.

Do not allow to enter into surface water or drains.

Clean using cleansing agents. Do not use solvents.

Avoid formation of flammable and explosive vapour concentrations in the air and exceeding the exposure limit values. Only use the material in places where open light, fire and other flammable sources can be kept away. Product may become electrostatically charged. Anti-static clothing including shoes are recommended. Floors must be electrically conductive. Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation. Avoid respiration of swarf. When using do not eat, drink or smoke. Do not empty containers with pressure - no pressure vessel! Always keep in containers that correspond to the material of the original container.

Store in a well-ventilated and dry room at temperatures between 5 °C and 30 °C. Protect from heat and direct sunlight. Keep container tightly closed. Store carefully closed containers upright to prevent any leaks.

When using do not eat, drink or smoke.

Keep away from heat sources, sparks and open flames. Use only spark proof tools. Electrical equipment must be protected meeting the accepted standard.

Provide good ventilation. This can be achieved with local or room suction.

For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374

Wear closely fitting protective glasses in case of splashes.

If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Use only respiratory protection equipment with CE-symbol including four digit test number.

Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.

Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.

No information available.

Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.

Hazardous decomposition byproducts may form with exposure to high temperatures.

not applicable

Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, nitrogen oxides.

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8