Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Elecsol 41 Aerosol
- Product Form
- Aerosol
- Product Code
- 14080001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC35 Washing and cleaning products (including solvent based products); Degreasing agent; Cleaner solvent
Manufacturers & Suppliers
ZEP UK Ltd
manufacturer
Tanhouse Lane, Widnes Cheshire, WA8 0RR, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+31 164 250 100
ZEP ITALIA SRL
manufacturer
Via Netunese Km. 25.000, 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
Emergency Contacts
Customer Service (NL)
+31 164 250 100
Customer Service (B)
+32 2 347 0117
Customer Service (IT)
+39 069 266 91
Customer Service (UK)
+44 151 422 1000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light, low boiling point EC: 265-151-9 | 64742-49-0 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| butane (< 0.1% butadine) EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
Ingredients according to Detergents Regulation 648/2004/EC: Aliphatic hydrocarbons >=30%
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water.
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Cool endangered receptacles with water spray.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight.
Store in a cool place. Heat will increase pressure and may lead to the receptacle bursting. Keep receptacle tightly sealed. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Material of gloves: PVC gloves, PVA gloves, Fluorocarbon rubber (Viton). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Elecsol 41 Aerosol?
The signal word is danger.
What is the physical form of Elecsol 41 Aerosol?
Elecsol 41 Aerosol is a aerosol appearing as colourless with colourless color. It has characteristic odor.
What is Elecsol 41 Aerosol used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC35 Washing and cleaning products (including solvent based products); Degreasing agent; Cleaner solvent
What are the hazard statements for Elecsol 41 Aerosol?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Elecsol 41 Aerosol?
The melting point is Undetermined. and the boiling point is >34°C.