Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KLEENFOAM COIL CLEANER
- Product Code
- KF_GNC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning and brightening aluminum finned cooling and heating coils.
Uses advised against
For professional use only. Product is a concentrate and should be diluted prior to use.
Manufacturers & Suppliers
National Refrigeration Products
distributor
985 Wheeler Way, Langhorne, PA 19047 USA
1-800-352-6951
Emergency Contacts
Chemtrec
1-800-424-9300
Chemtrec
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide | 1310-73-2 | 50% | No |
| Potassium hydroxide | 1310-58-3 | 20% | No |
| Sodium metasilicate | 6834-92-0 | 10% | No |
Notes
If Chemical Name/CAS No is "proprietary" and/or Weight-% is listed as a range, the specific chemical identity and/or percentage of composition has been withheld as a trade secret.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately.
Symptoms: Inhalation may cause irritation to nasal passages.
Neutralize with very diluted vinegar solution, wash with soap and water, apply skin cream. For large burns - GET IMMEDIATE MEDICAL ATTENTION.
Symptoms: Severe burns to exposed skin.
Immediately flush with plenty of water for up to 15 minutes. Immediate medical attention is required.
Symptoms: Blindness may occur.
Drink plenty of water. Do not induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Seek medical attention immediately.
Symptoms: Nausea.
Immediate Medical Attention
Immediate medical attention is required for eye contact, large burns, inhalation, and ingestion.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Not determined.
Avoid mixing with acids and soft metals.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Wear impervious to strong alkaline protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
wash to drain after product is neutralized.
Contain and collect spillage with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin, eyes or clothing. Wash face, hands and any exposed skin thoroughly after handling. Avoid mixing with acids and soft metals. Use personal protection recommended in Section 8.
Store locked up. Keep containers tightly closed in a dry, cool and well-ventilated place.
Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If vapors are detected, ventilate work area by opening windows and using exhaust fans. Always work with wind from behind.
Wear protective Neoprene™ gloves.
Use tight fitting, splash proof safety goggles. Contact lenses should not be worn when handling this material. Face Mask.
Refer to 29 CFR 1910.134 for respiratory protection requirements.
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
This product will warm slightly with the addition of water.
Product will react violently with the addition of incompatible materials. Hazardous polymerization does not occur.
Incompatible Materials. Keep out of reach of children.
Acids. Soft metals.
Thermal decomposition can lead to release of irritating and toxic gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3266
- Shipping Name
- Corrosive liquid, basic, inorganic, n.o.s. (Sodium hydroxide, Potassium hydroxide)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KLEENFOAM COIL CLEANER?
The signal word is danger.
What is the physical form of KLEENFOAM COIL CLEANER?
KLEENFOAM COIL CLEANER is a liquid appearing as clear brown liquid with clear to brownish color. It has herbal odor.
What is KLEENFOAM COIL CLEANER used for?
Cleaning and brightening aluminum finned cooling and heating coils.
What are the hazard statements for KLEENFOAM COIL CLEANER?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage
What is the melting point of KLEENFOAM COIL CLEANER?
The melting point is Not determined and the boiling point is Not determined.