NextSDS Logo
Safety Data Sheet EN

Citric Acid Powder Pillows

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Citric Acid Powder Pillows
Product Code
2106228

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory reagent.

Uses advised against

Consumer use.

Manufacturers & Suppliers

H

Hach Company

manufacturer

P.O.Box 389, Loveland, CO 80539, USA

+1(970) 669-3050

Emergency Contacts

Emergency Contact

+1(303) 623-5716

24 Hour Service

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves, protective clothing, eye protection, and face protection
P302 + P352 IF ON SKIN: Wash with plenty of soap and water
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P312 Call a POISON CENTER or doctor if you feel unwell
P332 + P313 If skin irritation occurs: Get medical attention
P337 + P313 If eye irritation persists: Get medical attention
P362 Take off contaminated clothing and wash before reuse
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/ container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Citric Acid 77-92-9 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. IF exposed or concerned: Get medical advice/attention. Get medical attention immediately if symptoms occur.

Skin contact

Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Do not rub affected area.

Ingestion

Do NOT induce vomiting. Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Call a physician.

Immediate Medical Attention

Get medical attention immediately if symptoms occur (inhalation). Get medical attention if irritation develops and persists (eye/skin). Call a physician (ingestion).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

Caution: Use of water spray when fighting fire may be inefficient.

Specific hazards

No information available.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Avoid contact with skin, eyes or clothing.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before reuse. Ensure adequate ventilation. Avoid breathing vapors or mists. In case of insufficient ventilation, wear suitable respiratory equipment.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Showers, Eyewash stations, Ventilation systems.

Hands

Wear suitable gloves. Impervious gloves. Barrier creams may help to protect the exposed areas of skin. Gloves must be inspected prior to use. The selected protective gloves have to satisfy the specifications of EU Directive 2016/425 and the standard EN 374 derived from it. Chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374-1:2016.

Eyes

If splashes are likely to occur, wear safety glasses with side-shields.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing. Long sleeved clothing. Avoid contact with eyes, skin and clothing.

Environmental

Local authorities should be advised if significant spillages cannot be contained. Do not allow into any sewer, on the ground or into any body of water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
Not applicable
Form
---
State Under Standard Conditions
---
Auto Ignition Temperature
1010 °C / 1850 °F
Decomposition Temperature
175 °C / 347 °F
Bulk Density
560 kg/m³
Appearance
crystalline
Colour
white
Solidification Point
---
Softening Point
---
Crystallisation Point
---
Metal Corrosion
Steel Corrosion Rate Not applicable, Aluminum Corrosion Rate Not applicable
Explosive Limits
---
Freezing Point
153 °C / 307.4 °F
Molecular Weight
192.12 g/mole
Odor Threshold
Not applicable
Upper Explosive Limit
64%
Density
---
Physical State
Solid
Solubility
---
Flash Point
Not applicable
Colour Intensity
---
Partition Coefficient
log Kow = -1.72
Odor
Odorless
Solubility In Fat
---
Vapor Pressure
Not applicable
Vapor Density
---
Melting Point
153 °C / 307.4 °F
Properties Status
---
Evaporation Rate
Not applicable
Lower Explosive Limit
18%
Voc Content
Not applicable
Ph
2.1 0.1 M
Cloud Point
---
Boiling Point
---
Physical State Data
solid
Solubility In Water
750000 mg/L
Relative Density
1.67
Flammability
---
Dynamic Viscosity
Not applicable
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Not applicable.

Hazardous reactions

None under normal processing. Hazardous polymerization does not occur.

Avoid

None known based on information supplied.

Incompatible

Strong acids. Strong bases. Strong oxidizing agents.

Decomposition

Carbon monoxide. Carbon dioxide (CO2). Thermal decomposition can lead to release of irritating and toxic gases and vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Citric Acid Powder Pillows?

The signal word is warning.

What is the physical form of Citric Acid Powder Pillows?

Citric Acid Powder Pillows is a solid appearing as crystalline with white color. It has odorless odor.

What is Citric Acid Powder Pillows used for?

Laboratory reagent.

What are the hazard statements for Citric Acid Powder Pillows?

This substance has 3 hazard statements:

  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation

What is the melting point of Citric Acid Powder Pillows?

The melting point is 153 °C / 307.4 °F .