Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Finixa wheel spray silver – medium light & fine 400ml
- Product Code
- TSP 525
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU21 Consumer uses: Private households / general public / consumers, PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, Application of the substance / the mixture Paint
Manufacturers & Suppliers
Chemicar Europe
national supplier
Baarbeek 2, B-2070 Zwijndrecht
+32 (0) 3 234 87 80
Emergency Contacts
Emergency Contact
+(32) (0)3 760 08 09
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Active substance with propellant
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| butane (containing < 0.1% butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| xylene (mix) EC: 215-535-7 | 1330-20-7 | 12.5 - 20% | Yes |
| Solvent naphtha (petroleum), light arom. Benzene<0.1% EC: 918-668-5 | 64742-95-6 | 0.3 - 1% | Yes |
| Carbon black EC: 215-609-9 | 1333-86-4 | 0.1 - 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately
Immediate Medical Attention
Call for medical help immediately; consult doctor if symptoms persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, Fire-extinguishing powder, Carbon dioxide, Alcohol resistant foam
Water with full jet
No further relevant information available.
Firefighter Protection
Mount respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13. Do not flush with water or aqueous cleansing agents.
Related Products
Similar products with comparable safety profiles
Finixa wheel spray silver - light & ultrafine 400ml
---
MOTIP WHEELSPRAY SILVER 500 ML
---
Weld Spray Perfect 400ml
UFI: CNM2-H05M-G00N-W4MM
MOTIP SprayPlast different colours 400ml
---
WELDINGSPRAY PERFECT - 400 ML
---
Motip Sprayplast 500ml
---
SILICONE SPRAY - 500 ML
UFI: HW23-H0RH-A00S-QTCA
Goldspray 150 ml
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care.
Store in a cool location. Keep receptacle tightly sealed. Do not seal receptacle gas tight. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solvent resistant gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Use suitable respiratory protective device in case of insufficient ventilation. Filter AX/P2
Use protective suit.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known
No further relevant information available
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Finixa wheel spray silver – medium light & fine 400ml?
The signal word is danger.
What is the physical form of Finixa wheel spray silver – medium light & fine 400ml?
Finixa wheel spray silver – medium light & fine 400ml is a aerosol appearing as silver grey with silver grey color. It has characteristic odor.
What is Finixa wheel spray silver – medium light & fine 400ml used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU21 Consumer uses: Private households / general public / consumers, PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, Application of the substance / the mixture Paint
What are the hazard statements for Finixa wheel spray silver – medium light & fine 400ml?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Finixa wheel spray silver – medium light & fine 400ml?
The melting point is Undetermined. and the boiling point is -44 °C.