Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LCM 850 5W30
- Product Form
- Mixture
- Product Code
- 120058
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Consumer use; Wide dispersive use; Lubricant; Lubricants and additives
Uses advised against
No additional information available
Manufacturers & Suppliers
UNIL LUBRICANTS NV
manufacturer
Bergensesteenweg 713, 1600 Sint - Pieters - Leeuw - Belgique-Belgie
0032 02 365 02 00
http://www.unil.be
Emergency Contacts
National Poisons Information Service (Cardiff Centre) Gwenwyn Ward, Llandough Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic, Baseoil - unspecified, [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 100 SUS at 100 °F (19cSt at 40 °C). It contains a relatively large proportion of saturated hydrocarbons.] EC: 265-157-1 | 64742-54-7 | 50 - 80% | Yes |
| Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbutyl and iso-Pr) esters, zinc salts EC: 283-392-8 | 84605-29-8 | 1 - 20% | Yes |
| Mineral oil* | --- | 2.5 - 10% | Yes |
| Distillates (petroleum), hydrotreated light paraffinic - Base oil EC: 265-158-7 | 64742-55-8 | 1 - 5% | Yes |
Notes
DMSO extract < 3% (IP 346) The highly refined mineral oil contains <3% (w/w) DMSO extract, according to IP346.
First Aid Measures
Emergency procedures for chemical exposure incidents
When symptoms occur: go into open air and ventilate suspected area.
Symptoms: None under normal use.
Rinse skin with water/shower. Wash contaminated clothing before reuse.
Symptoms: Contact during a long period may cause light irritation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: May cause slight irritation.
Call a POISON CENTER/doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam.
When cooling/extinguishing: no water in the substance.
Combustible product. Decomposes on exposure to temperature rise: release of harmful/irritant gases/vapours.
Evacuate area.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Clean up any spills as soon as possible, using an absorbent material to collect it.
Relevant water authorities should be notified of any large spillage to water course or drain.
Avoid release to the environment. Remove all floating oil before biological treatment/discharge.
Clean up any spills as soon as possible, using an absorbent material to collect it.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Do not get in eyes, on skin, or on clothing. No open flames. No smoking.
Store in original container. Keep container closed when not in use. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Keep in fireproof place.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product.
No open flames. No smoking. No flames, no sparks. Eliminate all sources of ignition. Keep in fireproof place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
protective gloves; Material: Nitrile rubber (NBR), Neoprene rubber (HNBR), Polyvinylchloride (PVC); Permeation: 6 (> 480 minutes)
Eye protection should only be necessary where liquid could be splashed or sprayed; Type: Safety glasses; Use: Droplet
Avoid the formation of mists in the atmosphere. If this material is handled at elevated temperature or under mist forming conditions, approved respiratory protection equipment should be used; Device: Aerosol mask; Filter type: Type P3; Condition: Protection for Liquid particles
Separate working clothes from town clothes. Launder separately. Rinse and then wash skin thoroughly with water and soap.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Combustible product. Stable at ambient temperature and under normal conditions of use. Not established.
No decomposition if stored normally.
No dangerous reactions known under normal conditions of use.
All heat sources. Sparks. Open flame. Direct sunlight. Extremely high or low temperatures.
Strong oxidizers.
fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LCM 850 5W30?
The signal word is no signal word.
What is the physical form of LCM 850 5W30?
LCM 850 5W30 is a liquid appearing as oily. with colourless to yellow. color. It has characteristic. odor.
What is the solubility of LCM 850 5W30?
Material insoluble in water. soluble in most organic solvents.
What is LCM 850 5W30 used for?
Industrial use, Professional use, Consumer use; Wide dispersive use; Lubricant; Lubricants and additives