Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Rust Converter
- Product Code
- 86878
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY; Rust remover / rust-removing agent
Uses advised against
Coating material
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
+44 01383 723344 / 0800 136925
Emergency Contacts
Emergency Contact
+44 01383 723344
During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dimethyl ether EC: 204-065-8 | 115-10-6 | 25 - 50% | Yes |
| Acetone EC: 200-662-2 | 67-64-1 | 10 - 25% | Yes |
| Reaction mass of ethylbenzene and xylene EC: 905-588-0 | --- | 10 - 25% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 5 - 10% | Yes |
| Butan-1-ol EC: 200-751-6 | 71-36-3 | 5 - 10% | Yes |
| 1-methoxypropan-2-ol EC: 203-539-1 | 107-98-2 | 5 - 10% | Yes |
| Butanol EC: 201-148-0 | 78-83-1 | 3% | Yes |
| Diglycidyl Ether of Bisphenol A | 25036-25-3 | 3% | Yes |
| Ethylbenzene EC: 202-849-4 | 100-41-4 | 3% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms. In case of unconsciousness bring patient into stable side position for transport.
Instantly wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Seek immediate medical advice.
Rinse out mouth. Do not induce vomiting; instantly call for medical help.
Immediate Medical Attention
Seek immediate medical advice (for eye contact). Instantly call for medical help (for swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water haze. Fight larger fires with water haze or alcohol-resistant foam.
Water with a full water jet.
Formation of poisonous gases during heating or in fires.
Cool endangered containers with water spray jet.
Firefighter Protection
Do not inhale explosion gases or combustion gases. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Open and handle container with care.
Store in cool, dry conditions in well sealed containers. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Wear suitable gloves tested to EN 374. Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.5 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: Value for the permeation: Level 6 > 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses (EN 166)
Only during spraying without adequate removal by suction. Filter A2 / P2 (EN 14387)
Protective work clothing (EN-13034/6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Rust Converter?
The signal word is danger.
What is the physical form of Rust Converter?
Rust Converter is a aerosol with light brown color. It has characteristic odor.
What is Rust Converter used for?
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY; Rust remover / rust-removing agent
What are the hazard statements for Rust Converter?
This substance has 8 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to the hearing organs through prolonged or repeated exposure.
What is the melting point of Rust Converter?
The melting point is Not determined and the boiling point is Not applicable, as aerosol.