Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 800 ppm TDS Standard
- Product Code
- HI70080
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Calibration of Total Dissolved Solids Probes.
Manufacturers & Suppliers
Hanna Instruments S.R.L.
manufacturer
str. Hanna Nr 1, 457260 loc. Nusfalau (Salaj), Romania
+40 260607700
Hanna Instruments, Inc
distributor
584 Park East Drive, Woonsocket, Rhode Island, USA 02895
+1 8004266287
Emergency Contacts
CHEMTREC
+1 8004249300
24 hours/365 days
CHEMTREC
+1 7035273887
24 hours/365 days
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions set forth in OSHA Hazard Communication Standard (HCS) (29 CFR 1910.1200).
First Aid Measures
Emergency procedures for chemical exposure incidents
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder and water spray.
None in particular.
Do not breathe combustion products.
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Firefighter Protection
Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Collect as much material as possible and eliminate the rest using jets of water
Related Products
Similar products with comparable safety profiles
TDS Calibration Solution, 1500 mg/L (ppm) @ 25°C/77°F
---
1413μS Standard Conductivity Solution
---
Sodium Chloride Standard Solution, 491 ± 2.5 mg/L
CAS: Not applicable
Tantalum ICP Standard Solution 10000 mg/l Ta
---
2,4,6-Tribromophenol Standard
---
1,1-Dichloroethene Standard
---
Stoddard Solvent Standard
---
35.00 ppt Salinity Calibration Solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before handling the product, consult all the other sections of this material safety data sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
Keep the product in clearly labelled containers. Keep containers away from any incompatible materials, see section 10 for details.
Do not eat, drink or smoke during use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None required.
None required.
None required, unless indicated otherwise in the chemical risk assessment.
None required.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage.
There are no particular risks of reaction with other substances in normal conditions of use.
No hazardous reactions are foreseeable in normal conditions of use and storage.
None in particular. However the usual precautions used for chemical products should be respected.
Information not available
Information not available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 800 ppm TDS Standard?
The signal word is no signal word.
What is the physical form of 800 ppm TDS Standard?
800 ppm TDS Standard is a liquid appearing as liquid with colourless color. It has odourless odor.
What is the solubility of 800 ppm TDS Standard?
soluble in water
What is 800 ppm TDS Standard used for?
Calibration of Total Dissolved Solids Probes.
What is the melting point of 800 ppm TDS Standard?
The melting point is Not available and the boiling point is Not available.