Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- COPPER 1000 PPM A/S STANDARD
- Product Code
- N9300114
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Manufacturers & Suppliers
PerkinElmer, Inc.
manufacturer
710 Bridgeport Avenue, Shelton, Connecticut 06484 USA
203-925-4600
PerkinElmer Australia
national supplier
Lvl 2, Bldg 5, Brandon Office Park, 530-540 Springvale Road, Glen Waverley, Melbourne, VIC 3150, Australia
1-800-033-391
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
+1 703-527-3887
CHEMTREC
+(61)-290372994
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Inform respective authorities in case of seepage into water course or sewage system. Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
COPPER 1000 PPM A/S STANDARD
---
ZINC 1000 PPM A/S STANDARD
---
COPPER CONCENTRATE NU-100
---
SELENIUM 1000 PPM A/S STANDARD
---
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 1000 mg/l Cu CertiPUR®
---
Copper ICP standard traceable to SRM from NIST Cu(NO₃)₂ in HNO₃ 2-3% 10000 mg/l Cu CertiPUR®
---
COPPER GREASE
---
MOTIP COPPER SPRAY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No further relevant information available regarding aquatic toxicity.
Persistence and degradability
No further relevant information available.
Behaviour in environmental systems
No further relevant information available.
Mobility in soil
Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (Nitric Acid)
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Workers are not allowed to be exposed to this hazardous material. Exceptions can be made by the authorities in certain cases. Generally not hazardous for water.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for COPPER 1000 PPM A/S STANDARD?
The signal word is warning.
What is the physical form of COPPER 1000 PPM A/S STANDARD?
COPPER 1000 PPM A/S STANDARD is a liquid appearing as transparent with transparent color. It has odourless odor.
What is COPPER 1000 PPM A/S STANDARD used for?
Laboratory chemicals
What are the hazard statements for COPPER 1000 PPM A/S STANDARD?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of COPPER 1000 PPM A/S STANDARD?
The melting point is 0 °C and the boiling point is 100 °C.