Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Husqvarna XP+ 2T Engine Oil
- Product Form
- Mixture
- Product Code
- 30404
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Husqvarna Professional Products, Inc
9335 Harris Corners Pkwy, Charlotte, NC 28269 - USA
704-597-5000
Emergency Contacts
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DISTILLATES (PETROLEUM) HYDROTREATED MIDDLE | 64742-46-7 | 15 - 25% | Yes |
| DISTILLATES (PETROLEUM), HYDROTREATED LIGHT | --- | 10 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Seek medical attention if ill effect or irritation develops.
Seek medical attention if ill effect or irritation develops. Wash skin with plenty of water.
Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Rinse cautiously with water for several minutes.
Do not induce vomiting. Rinse mouth. If you feel unwell, seek medical advice. Call a poison center/doctor/physician if you feel unwell.
Immediate Medical Attention
Seek medical attention if ill effect or irritation develops.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2). Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Vapors may cause fire/explosion if source of ignition is present. Watch out for invisible flames.
Evacuate area. Use water spray or fog for cooling exposed containers. Do not allow water to enter the vessels, a violent reaction may occur.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate unnecessary personnel. Do not breathe vapors. No open flames, no sparks, and no smoking. Prevent from entering sewers, basements and workpits, or any place where its accumulation can be dangerous.
Avoid release to the environment. Do not allow to enter drains or water courses.
Take up liquid spill into absorbent material. Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Take up mechanically (sweeping, shoveling) and collect in suitable container for disposal.
Materials: inert absorbent material (for example sand, sawdust, a universal binder, silica gel)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Do not breathe vapors. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Store in a well-ventilated place. Keep container tightly closed. Keep only in original container. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in a well-ventilated place. Keep cool.
Wear personal protective equipment. Take off immediately all contaminated clothing and wash it before reuse. Separate working clothes from town clothes. Launder separately. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure good ventilation of the work station.
Protective gloves. nitrile rubber gloves
Chemical goggles or safety glasses. Safety glasses
In case of inadequate ventilation wear respiratory protection.
Wear suitable protective clothing. Wear impervious rubber safety shoes. Chemical resistant apron
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
None under normal use.
High temperature.
Acids. Oxidizing agent.
Fume. Carbon dioxide. Carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Husqvarna XP+ 2T Engine Oil?
The signal word is no signal word.
What is the physical form of Husqvarna XP+ 2T Engine Oil?
Husqvarna XP+ 2T Engine Oil is a liquid with blue color. It has mild petroleum-like odor odor.
What is the melting point of Husqvarna XP+ 2T Engine Oil?
The melting point is Not applicable .