Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ULTIMATE 8000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Uses advised against
No information available
Manufacturers & Suppliers
Industrial Air Power
distributor
W 144 S 6303 College Court, Muskego, Wisconsin 53150
(414) 422-1717
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains no substances which at their given concentration, are considered to be hazardous to health.
First Aid Measures
Emergency procedures for chemical exposure incidents
In the case of inhalation of aerosol/mist consult a physician if necessary.
Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Drink plenty of water. Induce vomiting, but only if victim is fully conscious. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Dry chemical. Carbon dioxide (CO2). Foam.
Do not use a solid water stream as it may scatter and spread fire
In the event of fire, cool tanks with water spray.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contaminated surfaces will be extremely slippery. Use personal protective equipment.
Do not flush into surface water or sanitary sewer system.
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.
Materials: inert material (e.g. dry sand or earth)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Spilling onto the container’s outside will make container slippery. Avoid contact with eyes and skin.
Keep containers dry and tightly closed to avoid moisture absorption and contamination
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Nitrile rubber
Safety glasses
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
Usual safety precautions while handling the product will provide adequate protection against this potential effect
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not applicable
None under normal processing. Hazardous polymerization does not occur.
No special storage conditions required
No information available
None reasonably foreseeable
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ULTIMATE 8000?
The signal word is no signal word.
What is ULTIMATE 8000 used for?
Lubricant.
What are the hazard statements for ULTIMATE 8000?
This substance has 2 hazard statements:
- The product contains no substances which at their given concentration, are considered to be hazardous to health
What is the melting point of ULTIMATE 8000?
The melting point is No information available and the boiling point is > 315 °C.