Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BP 800
- Product Code
- 0224
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water treatment chemical
Manufacturers & Suppliers
CHEM-AQUA, INC
manufacturer
BOX 152170, IRVING, TEXAS 75015
972-579-2477
Emergency Contacts
CHEMTREC®
800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide | 1310-73-2 | 30 - 60% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. In case of shortness of breath, give oxygen. If not breathing, give artificial respiration.
Remove immediately all contaminated clothing. Wash off immediately with plenty of water for at least 15 minutes.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes.
Drink 1 or 2 glasses of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Control of circulatory system, shock therapy if needed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Carbon dioxide (CO2). Dry chemical. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Material can create slippery conditions. Contact with metals liberates flammable hydrogen gas.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, NOHSC (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Prevent further leakage or spillage if safe to do so. Material can create slippery conditions.
Do not flush into surface water or sanitary sewer system.
Pick up and transfer to properly labeled containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin or on clothing. Do not breathe mist.
Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Metal containers must be lined. Do not freeze. Freezing will affect the physical condition but will not damage the material. Thaw and mix before using. Indoor storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable. Hazardous polymerization does not occur.
None under normal processing.
Keep away from open flames, hot surfaces, and sources of ignition.
Acids, Strong oxidizing agents, Aldehydes, Contact with metals liberates hydrogen gas, Halogenated compounds.
Sodium oxides, Hydrogen, by reaction with metals, Phosgene, Hydroxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1824
- Shipping Name
- Sodium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BP 800?
The signal word is danger.
What is the physical form of BP 800?
BP 800 is a liquid appearing as transparent with colorless color. It has odorless odor.
What is the solubility of BP 800?
Completely soluble
What is BP 800 used for?
Water treatment chemical
What are the hazard statements for BP 800?
This substance has 2 hazard statements:
- H290: May be corrosive to metals
- H314: Causes severe skin burns and eye damage
What is the melting point of BP 800?
The melting point is No data available and the boiling point is 291 °F / 144 °C.