Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wire Aide[™] Wire Pulling Lubricant
- Product Code
- GB79-002, GB79-003, GB79-006N
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cable and duct lubrication.
Uses advised against
Not applicable.
Manufacturers & Suppliers
GB Electric
manufacturer
N85W12545 Westbrook Crossing Menomonee Falls, WI 53051
1-262-293-0600
Emergency Contacts
Emergency Contact
+1-651-430-2270
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product contains no reportable hazardous components under OSHA 29 CFR 1910.1200 and European Regulation (EC) No 1272/2008.
First Aid Measures
Emergency procedures for chemical exposure incidents
No first aid expected to be required. Not an inhalation hazard.
If skin becomes irritated, wash area thoroughly with soap and water. If irritation continues, seek medical attention.
Flush eyes with a large quantity of water for 15 minutes. If irritation continues, seek medical attention.
No first aid expected to be required. If difficulties arise, contact a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Does not apply.
Sealed container can build up pressure when exposed to high heat.
Cool containers with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Lubricant is extremely slippery. It should be washed, swept, or squeegeed from floor using wet mops.
Outside, spills should be covered with sand, dirt, gravel or calcium chloride.
It should be washed, swept, or squeegeed from floor using wet mops. Oxidizing agents, such as household bleach, can be used to eliminate the slippery character.
Materials: wet mops, oxidizing agents, household bleach
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid spills and clean them up immediately when they occur. Product is very slippery. For industrial or professional use only.
Keep product containers closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For repeated or prolonged skin contact, the use of impermeable gloves is recommended to prevent drying and possible irritation.
Safety glasses recommended.
Normal ventilation is adequate.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No dangerous reaction known under conditions of normal use.
None known.
None known.
Avoid materials that react with water.
Carbon dioxide, carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Wire Aide[™] Wire Pulling Lubricant?
The signal word is no signal word.
What is the physical form of Wire Aide[™] Wire Pulling Lubricant?
Wire Aide[™] Wire Pulling Lubricant is a viscous gel appearing as light yellow, viscous gel with no odor. . It has no odor odor.
What is Wire Aide[™] Wire Pulling Lubricant used for?
Cable and duct lubrication.